We recommend that only network administrators—and if possible, only a single person—use the admin account. You can configure accounts that provision different scopes of access. For example, you can create an account for a security auditor who must only be able to view the configuration and logs, but not change them.
Before you begin:
- If you want to use RADIUS or LDAP authentication, you must have already have created the RADIUS server or LDAP server configuration.
- You must have Read-Write permission for System settings.
To create an administrator user account:
- Go to System > Administrator.
- Make sure the Admin tab is selected.
- Click Create New to display the configuration editor.
- Complete the configuration as described in Administrator user configuration.
- Click Save.
Name of the administrator account, such as
Do not use spaces or special characters except the ‘at’ symbol (
If you use LDAP or RADIUS, specify the LDAP or RADIUS username. This is the user name that the administrator must provide when logging in to the CLI or web UI. The users are authenticated against the associated LDAP or RADIUS server.
After you initially save the configuration, you cannot edit the name.
Source IP address and netmask from which the administrator is allowed to log in. For multiple addresses, separate each entry with a space. You can specify up to three trusted areas. They can be single hosts, subnets, or a mixture.
Configuring trusted hosts hardens the security of the system. In addition to knowing the password, an administrator must connect only from the computer or subnets you specify.
Trusted host definitions apply both to the web UI and to the CLI when accessed through Telnet, SSH, or the CLI console widget. Local console access is not affected by trusted hosts, as the local console is by definition not remote, and does not occur through the network.
If ping is enabled, the address you specify here is also a source IP address to which the system will respond when it receives a ping or traceroute signal.
To allow logins only from one computer, enter only its IP address and 32- or 128-bit netmask:
To allow login attempts from any IP address (not recommended), enter:
Caution: If you restrict trusted hosts, do so for all administrator accounts. Failure to do so means that all accounts are still exposed to the risk of brute force login attacks. This is because if you leave even one administrator account unrestricted (i.e.
Tip: If you allow login from the Internet, set a longer and more complex New Password, and enable only secure administrative access protocols. We also recommend that you restrict trusted hosts to IPs in your administrator’s geographical area.
Tip: For improved security, restrict all trusted host addresses to single IP addresses of computer(s) from which only this administrator will log in.
Select a user-defined or predefined profile. The predefined profile named super_admin_prof is a special access profile used by the admin account. However, selecting this access profile will not confer all permissions of the admin account. For example, the new administrator would not be able to reset lost administrator passwords.
Note: This option does not appear for the admin administrator account, which by definition always uses the super_admin_prof access profile.
Optional. If you have enabled the virtual domain feature, select the virtual domain that this administrator can view and manage.
Note: This option does not apply to a global admin account.
Set a strong password for all administrator accounts. The password should be at least eight characters long, be sufficiently complex, and be changed regularly. To check the strength of your password, you can use a utility such as Microsoft’s password strength meter.
Re-enter the same password.