Fortinet black logo

Handbook

Step 4: Test connectivity to destination servers

Step 4: Test connectivity to destination servers

Use ping and traceroute to test connectivity to destination servers.

To test connectivity from the FortiADC system to the destination server:

Run the following commands from the CLI:

execute ping <destination_ip4>

execute traceroute <destination_ipv4>

To test connectivity from the destination server to the FortiADC system:
  1. Enable ping on the network interface.
  2. Use the ping and traceroute utilities available on the destination server to test connectivity to the FortiADC network interface IP address.

For troubleshooting tips, see Chapter 20: Troubleshooting.

Step 4: Test connectivity to destination servers

Step 4: Test connectivity to destination servers

Use ping and traceroute to test connectivity to destination servers.

To test connectivity from the FortiADC system to the destination server:

Run the following commands from the CLI:

execute ping <destination_ip4>

execute traceroute <destination_ipv4>

To test connectivity from the destination server to the FortiADC system:
  1. Enable ping on the network interface.
  2. Use the ping and traceroute utilities available on the destination server to test connectivity to the FortiADC network interface IP address.

For troubleshooting tips, see Chapter 20: Troubleshooting.