Fortinet Document Library

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

CLI Reference

config log setting highspeed

Use this command to configure high speed logging.

The high speed log feature is intended for deployments that require a high volume of logging activity. The logs are sent in binary format so they can be sent at a high speed. If you want to use high speed logging, contact Fortinet to obtain a utility for handling the binary format.

The feature supports traffic logs. Event logs and security logs are not supported.

Before you begin:

  • You must have read-write permission for log settings.

Syntax

config log setting highspeed

set server <string>

set status {enable | disable}

set traffic-log-status {enable | disable}

set traffic-log-category {slb|dns}

set udpport <integer>

end

server

IP address of the syslog server.

status

Enable/disable the configuration.

traffic-log-status

Enable/disable logging for traffic processed by the load balancing modules.

traffic-log-category

  • slb—Send server load balancing logs.
  • dns—Send global load balancing logs.

udpport

Listening port number of the syslog server. Usually this is UDP port 514.

config log setting highspeed

Use this command to configure high speed logging.

The high speed log feature is intended for deployments that require a high volume of logging activity. The logs are sent in binary format so they can be sent at a high speed. If you want to use high speed logging, contact Fortinet to obtain a utility for handling the binary format.

The feature supports traffic logs. Event logs and security logs are not supported.

Before you begin:

  • You must have read-write permission for log settings.

Syntax

config log setting highspeed

set server <string>

set status {enable | disable}

set traffic-log-status {enable | disable}

set traffic-log-category {slb|dns}

set udpport <integer>

end

server

IP address of the syslog server.

status

Enable/disable the configuration.

traffic-log-status

Enable/disable logging for traffic processed by the load balancing modules.

traffic-log-category

  • slb—Send server load balancing logs.
  • dns—Send global load balancing logs.

udpport

Listening port number of the syslog server. Usually this is UDP port 514.