Fortinet black logo

CLI Reference

config log setting global_remote

config log setting global_remote

Use this command to configure global remote log settings.

When FortiADC has several VDOMs, the customer may not want to configure the syslog server for each VDOM. This command defines syslog configuration at the global context so that each VDOM can be configured in one command.

The syslog server in the global context can be accessed by a root VDOM route.

Note

You can configure and customize the individual VDOM with config log setting remote.

Syntax

config log setting general

set override_global_remote {enable | disable}

next

end

override-global-remote

Enable/disable to override global remote.

Example

FortiADC-VM (root) # config log setting general

FortiADC-VM (general) # show full-configuration

config log setting general

set override_global_remote disable

end

config log setting remote

edit 1

set status enable

set server 10.106.155.142

set port 514

set proto tcp

set tcp_framing traditional

set loglevel information

set comma-separated-value disable

set facility kern

set event-log-status enable

set event-log-category configuration admin health_check system

set traffic-log-status disable

set attack-log-status disable

next

config log setting global_remote

Use this command to configure global remote log settings.

When FortiADC has several VDOMs, the customer may not want to configure the syslog server for each VDOM. This command defines syslog configuration at the global context so that each VDOM can be configured in one command.

The syslog server in the global context can be accessed by a root VDOM route.

Note

You can configure and customize the individual VDOM with config log setting remote.

Syntax

config log setting general

set override_global_remote {enable | disable}

next

end

override-global-remote

Enable/disable to override global remote.

Example

FortiADC-VM (root) # config log setting general

FortiADC-VM (general) # show full-configuration

config log setting general

set override_global_remote disable

end

config log setting remote

edit 1

set status enable

set server 10.106.155.142

set port 514

set proto tcp

set tcp_framing traditional

set loglevel information

set comma-separated-value disable

set facility kern

set event-log-status enable

set event-log-category configuration admin health_check system

set traffic-log-status disable

set attack-log-status disable

next