Fortinet black logo

Release Notes

Home FortiADC 7.0.0 Release Notes
7.0.0
7.4.3
7.4.2
7.4.1
7.4.0
7.2.5
7.2.4
7.2.3
7.2.2
7.2.1
7.2.0
7.1.4
7.1.3
7.1.2
7.1.1
7.1.0
7.0.5
7.0.4
7.0.3
7.0.2
7.0.1
7.0.0
6.2.6
6.2.5
6.2.4
6.2.3
6.2.2
6.2.1
6.2.0
6.1.6
6.1.5
6.1.4
6.1.3
6.1.2
6.1.1
6.1.0
6.0.4
6.0.3
6.0.2
6.0.1
6.0.0
5.4.4
5.4.4
5.4.3
5.4.2
5.4.1
5.4.0
5.3.7
5.3.6
5.3.5
5.3.4
5.3.3
5.3.2
5.3.1
5.3.0
5.2.8
5.2.7
5.2.6
5.2.5
5.2.4
5.2.3
5.2.2
5.2.1
5.2.0
5.1.7
5.1.6
5.1.5
5.1.4
5.1.3
5.1.2
5.1.1
5.1.0
5.0.4
5.0.3
5.0.2
5.0.1
5.0.0
4.8.8
4.8.7
4.8.6
4.8.5
4.8.4
4.8.3
4.8.2
4.8.1
4.8.0
4.7.4
4.7.3
4.7.2
4.7.1

Special notes

Special notes

Suggestions

  • HSM doesn't support TLS v1.3. If the HSM certificate is used in VS, the TLS v1.3 handshake will fail.
    Workaround: Uncheck the TLSv1.3 in the SSL profile if you're using the HSM certificate to avoid potential handshake failure.

  • To use the SRIOV feature, users must deploy a new VM.

  • When deploying the new GSLB based on FortiADC 7.0.0, the verify-CA function will be enabled by default.

Previous
Next

Special notes

Suggestions

  • HSM doesn't support TLS v1.3. If the HSM certificate is used in VS, the TLS v1.3 handshake will fail.
    Workaround: Uncheck the TLSv1.3 in the SSL profile if you're using the HSM certificate to avoid potential handshake failure.

  • To use the SRIOV feature, users must deploy a new VM.

  • When deploying the new GSLB based on FortiADC 7.0.0, the verify-CA function will be enabled by default.

Previous
Next