Fortinet black logo

CLI Reference

config system setting

config system setting

Use this command to configure log database behavior when disk utilization reaches its capacity.

Before you begin:

You must have read-write permission for system settings.

Syntax

config system setting

set statistics-db-full {overwrite | nowrite}

set log-db-full {overwrite | nowrite}

set predefine-isp {enable|disable}

end

statistics-db-full

Specify whether to overwrite stats or stop writing stats when the database disk allocation (10% of total disk space) is full. The default is overwrite the earliest stats.

log-db-full

Specify whether to overwrite logs or stop writing logs when the database disk allocation (40% of total disk space) is full. The default is overwrite the earliest logs.

predefine-isp

Enable/disable the predefined ISP address book. Enabled by default. You can use this setting to disable if you experience address conflicts that you cannot resolve using the ISP address book exceptions list.

Example

FortiADC-VM # get system setting

statistics-db-full : overwrite

log-db-full : overwrite

predefine-isp: enable

FortiADC-VM # config system setting

FortiADC-VM (setting) # set statistics-db-full nowrite

FortiADC-VM (setting) # end

config system setting

Use this command to configure log database behavior when disk utilization reaches its capacity.

Before you begin:

You must have read-write permission for system settings.

Syntax

config system setting

set statistics-db-full {overwrite | nowrite}

set log-db-full {overwrite | nowrite}

set predefine-isp {enable|disable}

end

statistics-db-full

Specify whether to overwrite stats or stop writing stats when the database disk allocation (10% of total disk space) is full. The default is overwrite the earliest stats.

log-db-full

Specify whether to overwrite logs or stop writing logs when the database disk allocation (40% of total disk space) is full. The default is overwrite the earliest logs.

predefine-isp

Enable/disable the predefined ISP address book. Enabled by default. You can use this setting to disable if you experience address conflicts that you cannot resolve using the ISP address book exceptions list.

Example

FortiADC-VM # get system setting

statistics-db-full : overwrite

log-db-full : overwrite

predefine-isp: enable

FortiADC-VM # config system setting

FortiADC-VM (setting) # set statistics-db-full nowrite

FortiADC-VM (setting) # end