Editing device information
Use the Edit Device page to edit information about a device. The information and options available on the Edit Device page depend on the device type, firmware version, and which features are enabled.
To edit information for a device or model device:
- Go to Device Manager and click the Devices Total tab in the quick status bar.
- In the content pane, select the device or model device, and click Edit. The Edit Device pane displays.
- Edit the device settings as required.
Name
The name of the device.
Description
Descriptive information about the device.
Company/Organization
Company or organization information.
Country
Type the country.
Province/State
Type the province or state.
City
Type the city.
Contact
Type the contact information.
Geographic Coordinates
Identifies the latitude and longitude of the device location to support the interactive maps.
IP Address
The IP address of the device.
Pre-Shared Key
The model device’s pre-shared key. Select Show Pre-shared Key to see the key. This option is only available when editing a model device that was added with a pre-shared key.
Admin User
The administrator user name.
Password
The administrator user password.
Device Information
Information about the device, including some or all of: serial number, device model, firmware version, connected interface, HA mode, cluster name, and cluster members.
HA Cluster
Select to identify the device as part of an HA cluster, and to identify the other device in the cluster.
- After making the appropriate changes click OK.