Fortinet Document Library

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

CLI Reference

central-management

Use this command to set or check the settings for central management.

Syntax

config system central-management

set type {fortimanager}

set allow-monitor {enable | disable}

set authorized-manager-only {enable | disable}

set serial-number <serial_number_string>

set fmg <string>

set enc-alogorithm {default | high | low}

end

Variable

Description

type {fortimanager}

Type of management server (default = fortimanager).

allow-monitor {enable | disable}

Enable/disable remote monitoring of the device (default = enable).

authorized-manager-only {enable | disable}

Enable/disable restricted to authorize manager only setting (default = enable).

serial-number <serial_number_string>

Set the device serial number. You can enter up to 5 serial numbers.

fmg <string>

Set the IP address or FQDN of the FortiManager (character limit = 31).

enc-alogorithm {default | high | low}

Set the SSL communication encryption algorithms:
  • default: SSL communication with high and medium encryption algorithms (default)
  • high: SSL communication with high encryption algorithms
  • low: SSL communication with low encryption algorithms

Use the show command to display the current configuration if it has been changed from its default value:

show system central-management

central-management

Use this command to set or check the settings for central management.

Syntax

config system central-management

set type {fortimanager}

set allow-monitor {enable | disable}

set authorized-manager-only {enable | disable}

set serial-number <serial_number_string>

set fmg <string>

set enc-alogorithm {default | high | low}

end

Variable

Description

type {fortimanager}

Type of management server (default = fortimanager).

allow-monitor {enable | disable}

Enable/disable remote monitoring of the device (default = enable).

authorized-manager-only {enable | disable}

Enable/disable restricted to authorize manager only setting (default = enable).

serial-number <serial_number_string>

Set the device serial number. You can enter up to 5 serial numbers.

fmg <string>

Set the IP address or FQDN of the FortiManager (character limit = 31).

enc-alogorithm {default | high | low}

Set the SSL communication encryption algorithms:
  • default: SSL communication with high and medium encryption algorithms (default)
  • high: SSL communication with high encryption algorithms
  • low: SSL communication with low encryption algorithms

Use the show command to display the current configuration if it has been changed from its default value:

show system central-management