Fortinet Document Library

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

Known Issues

The following issues have been identified in FortiAnalyzer version 6.2.0. For inquires about a particular bug or to report a bug, please contact Fortinet Customer Service & Support.

Bug ID Description
540397 In Fabric ADOM, subnet list should validate all fields instead of only the srcip and dstip fields.
540766 The new HA master cannot receive logs after HA failover on Azure.
541346 In Fabric ADOM, if handler is for non-FortiGate devices, drill-down of an event is not properly displayed.
542286 HA cannot work on unicast mode when members are located in different subnets.
542606 Local device event alerts should not be synchronize from HA Master to Slave.
542607 Drill-down of Applications & Websites - Top Web Sites(FortiClient) always shows No entry found.
543623 UEBA pop-up cannot show epname when endpoint is set with group by.
544064 The firewall sessions chart should be a bar chart classified by devices in the FortiCare 360 report.
544071 Network Interface Availability Faults Over Time Chart should be classified by devices in the FortiCare 360 report.
546067 FortiRecorder should display disk usage information for FortiRecorder in the Camera Manager page.
546073 When camera IP address is changed to Static mode, FortiRecorder identifies it with an incorrect address.
546990 Log files cannot be seen in the Log View for a long time after the files are imported from CLI.
547496 When report is run for a particular device, it should show data for only that device.
547583 After clearing the filter in FortiView, GUI still sends query with the filter and Log View still shows filtered logs.
547904 Device Manager HA Status column show devices' status as up when the device dashboard's cluster members always shows the status as down.
548112 After enabled resolving IP address, FortiView is not showing hostname on the column "Destination" in "Top Destinations" table.
548201 Under FortiView, it is missing the column "# of Clients" in the "Top Applications" table chart.
548245 SMAL configuration is not synchronized from Master to Slave.
548826 In SOC Monitor, FortiAnalyzer cannot show Sandbox Execution Details clearly in Night/Ocean theme.
548866 Master unit in FortiAnalyzer HA Cluster responds with VIP only for SNMP traffic.
548872 The footer in FortiAnalyzer report cover page is set to transparent and it does not work the same way as it was in previous releases.
548974 Under FortiView, policy-info is updated when moving FortiGate to a different ADOM.
549243 In Top SSID drill-down view, it cannot show related logs for a WiFi client.
549245 When camera wire-mode is changed from DHCP to Static, the gateway IP is always missing resulting in camera status error.
549343 The SOC period should be hidden or disable on the Compromised Host for FortiView.
549459 FortiCam network setting to TCP/HTTP results in connection error or network unreachable.
549481 Export to report chart from drill down panel in NOC fails.
549548 In FortiGate ADOM, widget count is not correct for some widget categories in Add Widget.
549718 Log Browse File Name cannot be filtered due to quotation marks.
549739 After upgrade, widgets displayed size are not scale with the content.
550068 FortiView drill-down to log view with unauthuser shows no result.
550113 In SOC widget "Security Rating report", the user cannot select Region and Industry and it is shown as undefined.
550136 Advanced options cannot be edited in an existing fabric connector (Storage).
550276 First time adding a new camera always shows unexpected MAC address.
550355 UEBA pop-up shows [object object] on some events.
550373 Avatar cannot be updated.
550544 When manually adding device, FortiWeb is missing v6.1 and FortiAuthenticator is missing v6.0.
550570 IOC drill down view shows incorrect last detect time.
550600 The fazsvcd process may use excessive memory on the system.
550619 UEBA may show some IPv6 source IPs that are unreadable.
550663 Exporting chart from FortiView main view Top Country/Region has an additional line, Reserved.
550894 Quickly switching from Top Threat to Top Application leads to SQL query error.
550933 Authorized FortiCarrier device does not shows up in the Fabric ADOM's FortiGate device drop-down list.
551125 When setting Event Handler with filter threshold over 25, FortiAnalyzer may not display any event.

551178

FortiAnalyzer may fail to reply to XML requests. This affects only the following models: FAZ-200F, FAZ-300F, FAZ-400E, FAZ-800F, FAZ-1000E, FAZ-2000E, FAZ-3000F, FAZ-3700F.

551243 In Fabric ADOM, View Related Logs in the FortiDDoS widget re-directs to an inaccurate page in Log View.

554116

Unable to receive logs from 5.6 FortiGate cluster.

Known Issues

The following issues have been identified in FortiAnalyzer version 6.2.0. For inquires about a particular bug or to report a bug, please contact Fortinet Customer Service & Support.

Bug ID Description
540397 In Fabric ADOM, subnet list should validate all fields instead of only the srcip and dstip fields.
540766 The new HA master cannot receive logs after HA failover on Azure.
541346 In Fabric ADOM, if handler is for non-FortiGate devices, drill-down of an event is not properly displayed.
542286 HA cannot work on unicast mode when members are located in different subnets.
542606 Local device event alerts should not be synchronize from HA Master to Slave.
542607 Drill-down of Applications & Websites - Top Web Sites(FortiClient) always shows No entry found.
543623 UEBA pop-up cannot show epname when endpoint is set with group by.
544064 The firewall sessions chart should be a bar chart classified by devices in the FortiCare 360 report.
544071 Network Interface Availability Faults Over Time Chart should be classified by devices in the FortiCare 360 report.
546067 FortiRecorder should display disk usage information for FortiRecorder in the Camera Manager page.
546073 When camera IP address is changed to Static mode, FortiRecorder identifies it with an incorrect address.
546990 Log files cannot be seen in the Log View for a long time after the files are imported from CLI.
547496 When report is run for a particular device, it should show data for only that device.
547583 After clearing the filter in FortiView, GUI still sends query with the filter and Log View still shows filtered logs.
547904 Device Manager HA Status column show devices' status as up when the device dashboard's cluster members always shows the status as down.
548112 After enabled resolving IP address, FortiView is not showing hostname on the column "Destination" in "Top Destinations" table.
548201 Under FortiView, it is missing the column "# of Clients" in the "Top Applications" table chart.
548245 SMAL configuration is not synchronized from Master to Slave.
548826 In SOC Monitor, FortiAnalyzer cannot show Sandbox Execution Details clearly in Night/Ocean theme.
548866 Master unit in FortiAnalyzer HA Cluster responds with VIP only for SNMP traffic.
548872 The footer in FortiAnalyzer report cover page is set to transparent and it does not work the same way as it was in previous releases.
548974 Under FortiView, policy-info is updated when moving FortiGate to a different ADOM.
549243 In Top SSID drill-down view, it cannot show related logs for a WiFi client.
549245 When camera wire-mode is changed from DHCP to Static, the gateway IP is always missing resulting in camera status error.
549343 The SOC period should be hidden or disable on the Compromised Host for FortiView.
549459 FortiCam network setting to TCP/HTTP results in connection error or network unreachable.
549481 Export to report chart from drill down panel in NOC fails.
549548 In FortiGate ADOM, widget count is not correct for some widget categories in Add Widget.
549718 Log Browse File Name cannot be filtered due to quotation marks.
549739 After upgrade, widgets displayed size are not scale with the content.
550068 FortiView drill-down to log view with unauthuser shows no result.
550113 In SOC widget "Security Rating report", the user cannot select Region and Industry and it is shown as undefined.
550136 Advanced options cannot be edited in an existing fabric connector (Storage).
550276 First time adding a new camera always shows unexpected MAC address.
550355 UEBA pop-up shows [object object] on some events.
550373 Avatar cannot be updated.
550544 When manually adding device, FortiWeb is missing v6.1 and FortiAuthenticator is missing v6.0.
550570 IOC drill down view shows incorrect last detect time.
550600 The fazsvcd process may use excessive memory on the system.
550619 UEBA may show some IPv6 source IPs that are unreadable.
550663 Exporting chart from FortiView main view Top Country/Region has an additional line, Reserved.
550894 Quickly switching from Top Threat to Top Application leads to SQL query error.
550933 Authorized FortiCarrier device does not shows up in the Fabric ADOM's FortiGate device drop-down list.
551125 When setting Event Handler with filter threshold over 25, FortiAnalyzer may not display any event.

551178

FortiAnalyzer may fail to reply to XML requests. This affects only the following models: FAZ-200F, FAZ-300F, FAZ-400E, FAZ-800F, FAZ-1000E, FAZ-2000E, FAZ-3000F, FAZ-3700F.

551243 In Fabric ADOM, View Related Logs in the FortiDDoS widget re-directs to an inaccurate page in Log View.

554116

Unable to receive logs from 5.6 FortiGate cluster.