Assigning camera schedules to a profile

By default, camera profiles are set to use the Always schedule.

To assign a custom schedule to a camera profile, you must first enable it through the CLI. Once enabled, a table is added to the Camera Profile editor which allows you to select the custom schedule.

After the first custom schedule has been enabled on a profile, subsequent schedules can be selected directly through the GUI. New schedules can be created by clicking the Create New button above the table.

For more information on creating a custom schedule, see Creating and editing camera schedules.

To enable a recording schedule in the FortiAnalyzer CLI:

config fortirecorder camera profile

edit [profile name]

config recording-schedule

edit [schedule name]

end

To enable a video schedule in the FortiAnalyzer CLI:

config fortirecorder camera profile

edit [profile name]

config video-schedule

edit [schedule name]

end

To assign the schedule through the GUI:

1. Go to FortiRecorder > Camera Manager > Camera Profile.
2. Select the camera profile and click Edit.
   A table appears underneath the Video Profiles and/or Recordings & Detections Settings sections, depending on where you enabled the schedule.
3. Select a recording type or recording stream, then click Edit.
4. Select a schedule from the dropdown menu.
5. Click OK.