Fortinet Document Library

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

CLI Reference

fwm-setting

Use this command to configure firmware management settings.

Syntax

config fmupdate fwm-setting

set auto-scan-fgt-disk {enable | disable}

set check-fgt-disk {enable | disable}

set fds-failover-fmg {enable | disable}

set fds-image-timeout <integer>

set multiple-steps-interval <integer>

end

Variable

Description

auto-scan-fgt-disk {enable | disable}

Enable/disable automatic scanning of a FortiGate disk when required (default = enable).

check-fgt-disk {enable | disable}

Enable/disable checking a FortiGate disk prior to upgrading the image (default = enable).

fds-failover-fmg {enable | disable}

Enable/disable using the a local image file on the FortiManager when the FDS download fails (default = enable).

fds-image-timeout <integer>

Set the timer for FortiGate image downloads from FortiGuard, in seconds (300 - 3600, default = 1800).

multiple-steps-interval <integer>

Set the waiting time between multiple step upgrades, in seconds (30 - 180, default = 60).

fwm-setting

Use this command to configure firmware management settings.

Syntax

config fmupdate fwm-setting

set auto-scan-fgt-disk {enable | disable}

set check-fgt-disk {enable | disable}

set fds-failover-fmg {enable | disable}

set fds-image-timeout <integer>

set multiple-steps-interval <integer>

end

Variable

Description

auto-scan-fgt-disk {enable | disable}

Enable/disable automatic scanning of a FortiGate disk when required (default = enable).

check-fgt-disk {enable | disable}

Enable/disable checking a FortiGate disk prior to upgrading the image (default = enable).

fds-failover-fmg {enable | disable}

Enable/disable using the a local image file on the FortiManager when the FDS download fails (default = enable).

fds-image-timeout <integer>

Set the timer for FortiGate image downloads from FortiGuard, in seconds (300 - 3600, default = 1800).

multiple-steps-interval <integer>

Set the waiting time between multiple step upgrades, in seconds (30 - 180, default = 60).