Resolved Issues
The following issues have been fixed in FortiAnalyzer version 7.0.5. To inquire about a particular bug, please contact Customer Service & Support.
Device Manager
| Bug ID | Description |
|---|---|
|
798197 |
Under the Device Manager, FortiAnalyzer does not show the color of the logging devices properly (red or green). |
|
811627 |
FortiWeb FlexVM is not supported by the FortiAnalyzer. |
|
816072 |
In Device Manager, model device configured with a pre-shared key is not automatically authorized. |
|
819664 |
Under Device Manager, Average Log Rate is displayed zero for FortiGates HA Cluster. |
|
827276 |
FortiAnalyzer does not let all VDOMs to be added to the Device Manager if the FortiGates have more than 10 VDOMs. |
|
835653 |
The FortiGate's IP address and firmware version are not updated when FortiGates are added manually to a non-root ADOM. |
|
837310 |
FortiAnalyzer does not show the correct IP addresses and firmware versions for its registered FortiGates. |
| 838727 | Log Status of the Devices are displayed red when the Primary has a zero lograte. |
| 846904 | Under the Device Manager, the Average Log Rates are not displayed. |
Event Management
| Bug ID | Description |
|---|---|
|
825422 |
FortiAnalyzer Event Handler does not trigger any alerts when "Log Field" has been set to "Virtual Domain (vd)". |
Fabric View
| Bug ID | Description |
|---|---|
|
824417 |
Failed to save the "FortiClient EMS Cloud" configuration under the Fabric Connector as it kept changing to the regular "FortiClient EMS" setting. |
FortiSOC
| Bug ID | Description |
|---|---|
|
701751 |
FortiGate connectors disappearing from FortiSOC connectors list. |
|
757650 |
Wrong device name (devname) is filled in event email notification. |
|
784316 |
FortiSOC Connectors do not display the status of all the cluster's members. |
|
814419 |
When creating/configuring a playbook from scratch for an incident the task status failed because of a missing category. |
|
821135 |
EMS connector status is inconsistent. |
|
833991 |
FortiOS connector does not display health status of the Security Fabric members. |
FortiView
| Bug ID | Description |
|---|---|
|
754733 |
"No entry found" is displayed when checking the "Top Cloud Applications" logs under the FortiView. |
|
754781 |
FortiView widgets log out even if the auto-refresh feature is being used. |
|
760228 |
FortiView displays higher bandwidth value than Report. |
|
818065 |
FortiView Top Applications view does not show any data. |
|
818077 |
Top application axis labels are not displayed correctly in Monitor section. |
|
822462 |
Secure SD-WAN Monitor devices are not sorted alphabetically like other widgets. |
|
822471 |
SD-WAN Performance Status widget under the Secure Monitor displays gray intervals even if there is data available. |
Log View
| Bug ID | Description |
|---|---|
|
682584 |
FortiClient logging for Chromebook stops intermittently and can be only resumed by restarting FortiAnalyzer. |
|
797985 |
After downloading the IPS logs, the "cve field" is missing. |
|
816490 |
In Log Browse, for HA devices, only primary device's log files are displayed. |
|
820560 |
When log filters have been applied, Log View does not return all the matching logs; only displays one page of matching logs. |
|
836777 |
When admin profile is set as "Read-Only", Add Filter under the LogView/FortiView displays no fields. |
|
843730 |
Fabric log host_name and host_osname fields are displayed with incorrect values. |
|
817761 828139 |
Downloading the traffic logs with custom time in text format displays error 500. |
Others
| Bug ID | Description |
|---|---|
|
719298 |
FortiAnalyzer failed to provide API Response to the FortiPortal's API Requests. |
|
779943 |
High memory usage has been observed when creating dataset or running reports on FortiAnalyzer. |
|
792963 |
Switching between ADOMs and going to the Device Manager shows a blank page. |
|
804934 |
Type mismatch error is displayed for the column "dstuuid". |
| 809133 | Several process crashes (logfwd/filefwd/clusterd), which have been observed when loading the devices from Device Manager, made FortiAnalyzer unable to show any logs. |
|
812730 |
There is an issue on HA member synchronization on the Azure platform. |
|
817639 |
FortiAnalyzer archive logs caused unexpected increase in the disk quota usage. |
|
818118 |
Logs between HA members are not synched. |
|
823294 |
SSH connection between FortiGate and FortiAnalyzer/FortiManager v7.0.4/7.2.1 or later fails due to server_host_key_algorithms mismatch. |
|
829869 |
When FortiAnalyzer is working on Collector Mode, system storage size increases over time; hence, FortiAnalyzer might stop receiving new logs. |
| 837657 | Creating ADOMs using JSON API, default ADOM configs like report, datasets, charts, etc. are not created. |
| 839910 | The "diagnose test
application oftpd" command does not display any outputs for some
FortiGate devices registered on FortiAnalyzer. |
Reports
| Bug ID | Description |
|---|---|
|
764194 |
Playbooks run_report fails with "missing device(s)" if "Playbook Starter" as devices filter is selected. |
|
768843 |
FortiAnalyzer does not support importing outbreak alert reports to ADOM type FortiGate. |
|
783172 |
Reports may only show 64 devices report details after upgrade. |
|
788801 |
"Throughput utilization billing report" does not display the complete data for the "yesterday" time-period. |
|
816975 |
Not able to upload the report to server by output profile. |
|
824260 |
Failed to create reports using API request in FortiAnalyzer. |
|
832037 |
"Create Chart" window does not display all the parameters. |
|
835422 |
FortiAnalyzer does not display any data on its report when group filter and LDAP query is being used. |
|
837395 |
"Show Top" & "Drilldown Top" preview features under the "Edit Chart" do not display the chart based on the selected values. |
|
848573 |
When specifying FortiWiFi as devices, "SD-WAN Device Link Bandwidth" and "SD-WAN Device Rules Donut Bandwidth" charts do not display any data. |
System Settings
| Bug ID | Description |
|---|---|
|
669478 |
Several dev-type mismatches have been observed between CLI and GUI under log-forwarding configuration. |
|
734407 |
HA status does not display the DB inserting issue on the secondary member. |
|
736233 |
HA VIP interface shows different on CLI and GUI. |
|
745468 |
Enabling the SNMP event "raid-changed" in CLI does not enable it on the GUI. |
|
752111 |
Traffic, Security and Event logs section under the LogView tab are missing for Primary HA. |
|
759601 |
FortiAnalyzer using Azure AD SAML SSO may show 'invalid_logout_response_error' after logout. |
| 803074 | The sorting feature does not work correctly for storage info columns under the System Settings. |
|
813243 |
FortiAnalyzer log-forwarding not able to forward FortiManager events with Log-ID filter to syslog |
|
815644 |
In FortiAnalyzer cannot configure log forwarding exclusions for FortiClient. |
| 829015 | "Privacy Masking" feature does not work properly for admins whose admin type utilizes "Remote Authentication Server". |
| 832973 | Analytics and Archive details are missing from "Edit Log Storage Policy". |
| 837203 | Unable to fetch logs between FAZ devices due to Invalid cross-device link error. |
|
839783 |
When Interface type is in Aggregate mode, the "Administrative Access" services are not displayed correctly based on how they have been configured. |
|
842943 |
After upgrading FortiAnalyzer, "fortinet-ca2" is missing under the CA Certificates; this prevents devices from establishing connections to FortiAnalyzer. |
Common Vulnerabilities and Exposures
Visit https://fortiguard.com/psirt for more information.
| Bug ID | CVE references |
|---|---|
|
839861 |
FortiAnalyzer 7.0.5 is no longer vulnerable to the following CVE Reference:
|