Fortinet Document Library

Version:

Version:

Version:


Table of Contents

Cookbook

Download PDF
Copy Link

Enabling self-registration

  1. Go to Authentication > Self-service Portal > General.
  2. Enter a Site name, add an Email signature that you would like appended to the end of outgoing emails, and select OK.

  3. Then go to Authentication > Self-service Portal > Self-registration and select Enable.
  4. Enable Require administrator approval and Enable email to freeform addresses, and enter the administrator’s email address in the field provided.

    Enable Place registered users into a group, select the user group created earlier, and configure basic account information to be sent to the user by Email.

    Open the Required Field Configuration drop-down and enable First name, Last name, and Email address.

Enabling self-registration

  1. Go to Authentication > Self-service Portal > General.
  2. Enter a Site name, add an Email signature that you would like appended to the end of outgoing emails, and select OK.

  3. Then go to Authentication > Self-service Portal > Self-registration and select Enable.
  4. Enable Require administrator approval and Enable email to freeform addresses, and enter the administrator’s email address in the field provided.

    Enable Place registered users into a group, select the user group created earlier, and configure basic account information to be sent to the user by Email.

    Open the Required Field Configuration drop-down and enable First name, Last name, and Email address.