Fortinet Document Library

Version:

Version:

Version:

Version:

Version:


Table of Contents

Port-based network access control

Port-based network access control (PNAC), or 802.1X, authentication requires a client, an authenticator, and an authentication server (such as a FortiAuthenticator device).

The client is a device that wants to connect to the network. The authenticator is simply a network device, such as a wireless access point or switch. The authentication server is usually a host that supports the RADIUS and EAP protocols.

The client is not allowed access to the network until the client’s identity has been validated and authorized. Using 802.1X authentication, the client provides credentials to the authenticator, which the authenticator forwards to the authentication server for verification. If the authentication server determines that the credentials are valid, the client device is allowed access to the network.

FortiAuthenticator supports several IEEE 802.1X EAP methods.

Port-based network access control

Port-based network access control (PNAC), or 802.1X, authentication requires a client, an authenticator, and an authentication server (such as a FortiAuthenticator device).

The client is a device that wants to connect to the network. The authenticator is simply a network device, such as a wireless access point or switch. The authentication server is usually a host that supports the RADIUS and EAP protocols.

The client is not allowed access to the network until the client’s identity has been validated and authorized. Using 802.1X authentication, the client provides credentials to the authenticator, which the authenticator forwards to the authentication server for verification. If the authentication server determines that the credentials are valid, the client device is allowed access to the network.

FortiAuthenticator supports several IEEE 802.1X EAP methods.