Create the Smart Connect profile

To create Smart Connect profiles:

1. Go to Authentication > Portals > Smart Connect Profiles, and click Create New.
2. Under General Information, enter a name for the profile, and click Next.
   
3. Under Wireless Connection Settings, set the following and then click Next.
   1. SSID: Enter your SSID name, for example Secure Wi-Fi.
   2. Auth method: WPA2 Enterprise.
   3. Hidden SSID: Disabled.
      
4. Under EAP General Settings, set the following and then click Next.
   1. EAP Type: TLS.
   2. Signing CA: Select the local Root CA configured earlier.
   3. Username Format: Select your preference, for example username@realm.
      
5. Under Certificate Installation Settings, set the following and then click OK.
   1. Install local CA certificates: Choose to install the local Root_CA certificate.
   2. Install trusted CA certificates: Choose to install any certificate that is required for all relevant certificate chains to be fully trusted.
      
6. Select OK to complete the setup of the Smart Connect profile.