Fortinet black logo

Creating a test user

6.4.0
Copy Link
Copy Doc ID efb53b49-7278-11ec-bdf2-fa163e15d75b:92631
Download PDF

Creating a test user

Create a single test user with FortiToken Mobile two-factor authentication enabled.

If required, remote LDAP and RADIUS users can also be set up.

To configure remote RADIUS and LDAP users, see Remote users.

To create the user:
  1. Go to Authentication > User Management > Local Users, and select Create New.
  2. Enter a username and password for the local user.
  3. Disable Allow RADIUS authentication.

  4. Click OK and enter password to validate.
  5. Enable One-Time Password (OTP) authentication and choose Deliver token code by FortiToken Mobile.

    Select FortiToken Mobile added earlier from the relevant dropdown menu.

  6. Set the Activation delivery method to Email.

    This will automatically open the User Information section where you can enter the user email address in the field provided.

  7. Click OK to save changes to the local user.

    The activation information is sent to the user via the email address provided in the User Information pane.

  8. Open the email to complete the activation and install the token to the FortiToken Mobile app.

Creating a test user

Create a single test user with FortiToken Mobile two-factor authentication enabled.

If required, remote LDAP and RADIUS users can also be set up.

To configure remote RADIUS and LDAP users, see Remote users.

To create the user:
  1. Go to Authentication > User Management > Local Users, and select Create New.
  2. Enter a username and password for the local user.
  3. Disable Allow RADIUS authentication.

  4. Click OK and enter password to validate.
  5. Enable One-Time Password (OTP) authentication and choose Deliver token code by FortiToken Mobile.

    Select FortiToken Mobile added earlier from the relevant dropdown menu.

  6. Set the Activation delivery method to Email.

    This will automatically open the User Information section where you can enter the user email address in the field provided.

  7. Click OK to save changes to the local user.

    The activation information is sent to the user via the email address provided in the User Information pane.

  8. Open the email to complete the activation and install the token to the FortiToken Mobile app.