To view the list of static routes, go to System > Network > Static Routing. Routes can be created, edited, and deleted as required. Use the checkboxes to select the static route entries you want to either Delete or Edit.
The following information is shown:
|Select to create a new static route.
|Select to delete the selected static route.
|Select to edit the selected static route.
|The destination IP address and netmask for this route.
|The IP address of the next hop router to which this route directs traffic.
|The device or interface associated with this route.
- In the static route list, select Create New. The Create New Static Route window opens.
- Edit the following settings as required.
Destination IP/Mask Enter the destination IP address and netmask for this route. Network interface Select the network interface that connects to the gateway. Gateway Enter the IP address of the next hop router to which this route directs traffic. Comment Optionally, enter a comment about the route.
- Select OK to create the new static route.