Creating gateway lists
Gateway lists are useful when using FortiClient EMS integrated with FortiGate. If using FortiClient EMS without FortiGate, you are not required to use gateway lists.
You can create one or more gateway lists. Each list can contain IP addresses for multiple FortiGate units.
To create gateway lists:
- Go to Gateway Lists > Manage Gateway Lists.
- Click the Add button.
- Configure the following:
Name
Enter the list name.
Comment
Enter additional comments (optional).
IP addresses/hostnames
Enter the IP address and port for FortiGate devices using the following format: IP:port. You can also use an FQDN.
Press the Enter key to add additional IP addresses.
Connect to local subnets only
Enable to only allow to connect to local subnets.
Use connection key
Enable the connection key endpoints can use to connect to FortiGate units.
New connection key
Enter the connection key.
Confirm new connection key
Reenter the connection key to confirm.
Managed by EMS
Select an option from the dropdown list. Users can configure this IP address in System Settings > Server.
- Click Save.