On-net/off-net status with FortiGate and EMS
Endpoints must connect FortiClient Telemetry to FortiGate and/or EMS for FortiClient to use an on-net, off-net, or offline status.
The following rules identify when FortiGate, EMS, or FortiClient determine the status:
When FortiClient 6.0.5 connects Telemetry to FortiOS 6.0.0 or later and/or EMS 6.0.0 or later, FortiClient determines whether the endpoint has an on-net or off-net status.
The following applies when FortiClient 6.0.5 is used with versions of FortiOS and/or EMS earlier than 6.0.0:
- When FortiClient connects Telemetry to FortiOS or EMS, FortiGate or EMS determines whether the endpoint has an on-net or off-net status.
- When FortiClient cannot connect FortiClient Telemetry to FortiOS or EMS, FortiClient determines the on-net or off-net status, based on the on-net subnets.
If FortiClient receives an on-net/off-net status from FortiOS or EMS, it assumes it is connected to a version of FortiOS or EMS prior to 6.0.0 and follows the received status information.
For more details on determining on-net/off-net status, see Determining on-net/off-net status in the FortiClient EMS Administration Guide.