Fortinet Document Library

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

EMS Administration Guide

VPN

Enable or disable the eye icon to show or hide this feature from the end user in FortiClient.

Configuration

Description

VPN

Enable or disable VPN use.

General

 

Allow Personal VPN

Allow users to create, modify, and use personal VPN configurations.

Disable Connect/Disconnect

Enable or disable the Connect/Disconnect button when using Auto Connect with VPN.

Show VPN before Logon

Allow user to select a VPN connection before logging into the system.

Minimize FortiClient Console on Connect

Minimize FortiClient after successfully establishing a connection.

Show Connection Progress

Display information on the FortiClient GUI while establishing connections.

Suppress VPN Notifications

Block FortiClient from displaying any VPN connection or error notifications.

Use Vendor ID

Use vendor ID. Enter the vendor ID in the Vendor ID field.

Current Connection

Select the current VPN tunnel.

Keep Running Max Tries

The maximum number of attempts to retry a VPN connection that was lost due to network issues. If set to 0, it retries indefinitely

SSL VPN

Enable SSL VPN.

DNS Cache Service Control

FortiClient disables Windows DNS cache when an SSL VPN tunnel is established. The DNS cache is restored after the SSL VPN tunnel is disconnected. If it is observed that FSSO clients do not function correctly when an SSL VPN tunnel is up, use Prefer SSL VPN DNS to control the DNS cache.

Prefer SSL VPN DNS

When disabled, the custom DNS server from SSL VPN is not added to the physical interface. When enabled, the custom DNS server from SSL VPN is prepended to the physical interface.

IPsec VPN

Enable IPsec VPN.

 

Enable or disable the following:

  • Beep If Connection Fails
  • Use Windows Store Certificates
    • Current User Windows Store Certificates (IPsec only)
    • Local Computer Windows Store Certificates (IPSec only)
  • Use Smart Card Certificates
  • Show Auth Certificates Only
  • Block IPv6
  • Enable UDP Checksum
  • Disable Default Route
  • Check for Certificate Private Key
  • Enhanced Key Usage Mandatory

The following options are available in the Creating VPN Tunnel window after clicking the Add Tunnel button in the VPN Tunnels section.

Basic Settings

 

Name

Enter a VPN name. Use only standard alphanumeric characters. Do not use symbols or accented characters.

Type

Select SSL VPN or IPsec VPN.

Remote Gateway

Enter the IP address/hostname of the remote gateway. Multiple remote gateways can be configured by separating each entry with a semicolon. If one gateway is not available, the VPN connects to the next configured gateway.

Port

Enter the access port. Available if SSL VPN is selected. The default port is 443.

Require Certificate

Require a certificate. Available if SSL VPN is selected.

Authentication Method

Select the authentication method for the VPN. Available if IPsec VPN is selected.

Pre-Shared Key

Enter the preshared key required. Available if Pre-Shared Key is selected for Authentication Method.

Prompt for Username

Prompt for the username when accessing VPN.

VPN Settings

Available if IPsec VPN is selected for the VPN type.

Mode

Select Main or Aggressive.

Options

Select Mode Config, Manual Set, or DHCP over IPsec.

Specify DNS Server (IPv4)

Specify the DNS server for the VPN tunnel. Available if Manual Set is selected.

Assign IP Address (IPv4)

Enter the IP address to assign for the VPN tunnel. Available if Manual Set is selected.

Split Table

Enter the IP address and subnet mask for the VPN tunnel. Available if Manual Set or DHCP over IPsec is selected.

Phase 1

Available if IPsec VPN is selected for the VPN type.

Select the encryption and authentication algorithms used to generate keys for protecting negotiations and add encryption and authentication algorithms as required.

You need to select a minimum of one and a maximum of two combinations. The remote peer or client must be configured to use at least one of the proposals that you define.

Encryption

Select the encryption standard.

Authentication

Select the authentication method.

DH Groups

Select one or more Diffie-Hellman groups from DH group 1, 2, 5, 14, 15, 16, 17, 18, 19 and 20. At least one of the DH Group settings on the remote peer or client must match one the selections on the FortiGate. Failure to match one or more DH groups results in failed negotiations.

Key Life

Enter the time (in seconds) that must pass before the IKE encryption key expires. When the key expires, a new key is generated without interrupting service. The key life can be from 120 to 172,800 seconds.

Local ID

Enter the local ID.

Enable Implied SPDO

Enable implied SPDO. Enter the timeout in seconds.

Dead Peer Detection

Select this checkbox to reestablish VPN tunnels on idle connections and clean up dead IKE peers if required.

NAT Traversal

Select the checkbox if a NAT device exists between the client and the local FortiGate. The client and the local FortiGate must have the same NAT traversal setting (both selected or both cleared) to connect reliably.

Enable Local LAN

Enable local LAN.

Enable IKE Fragmentation

Enable IKE fragmentation.

Phase 2

Available if IPsec VPN is selected for the VPN type.

Select the encryption and authentication algorithms that is proposed to the remote VPN peer. You can specify up to two proposals. To establish a VPN connection, at least one of the proposals that you specify must match configuration on the remote peer.

Encryption

Select the encryption standard.

Authentication

Select the authentication method.

DH Group

Select one Diffie-Hellman (DH) group (1, 2, 5, 14, 15, 16, 17, 18, 19 or 20). This must match the DH Group that the remote peer or dialup client uses.

Key Life

The Key Life setting sets a limit on the length of time that a phase 2 key can be used. The default units are seconds. Alternatively, you can set a limit on the number of kilobytes (KB) of processed data, or both. If you select both, the key expires when either the time has passed or the number of KB have been processed. When the phase 2 key expires, a new key is generated without interrupting service.

Enable Replay Detection

Replay detection enables the unit to check all IPsec packets to see if they have been received before. If any encrypted packets arrive out of order, the unit discards them.

Enable Perfect Forward Secrecy (PFS)

Select the checkbox to enable Perfect forward secrecy (PFS). PFS forces a new Diffie-Hellman exchange when the tunnel starts and whenever the phase 2 key life expires, causing a new key to be generated each time.

Auto Keep Alive

Enable auto keep alive.

Allow non-administrators to use machine certificates

Allow non-administrator users to use local machine certificates.

Advanced Settings

 

Enable One-Time Password

Enable one-time password. Available if IPsec VPN is selected for the VPN type.

Enable XAuth

Enable IKE Extended Authentication (xAuth). Available if IPsec VPN is selected for the VPN type.

XAuth Timeout

Only available if Enable XAuth is enabled. Configure the IKE Extended Authentication (xAuth) timeout in seconds. Default value is two minutes if not configured. Enter a value between 120 and 300 seconds.

Prompt for Certificate

Prompt the user for the certificate. Available if IPsec VPN is selected for the VPN type.

Enable Single User Mode

Enable Single User Mode.

Show Passcode

Display Passcode instead of Password in the VPN tab on the FortiClient console.

Enable Invalid Server Certificate Warning

Display a warning to the user that the certificate is invalid before attempting VPN connection. Available if SSL VPN is selected for the VPN type.

Save Username

Save your username.

Allow Non-Administrators to Use Machine Certificates

Allow non-administrator users to use local machine certificates. Available if SSL VPN is selected for the VPN type.

Show "Remember Password" Option

Have the VPN tunnel remember the password.

Show "Always Up" Option

Have the VPN tunnel always up. This also needs to be enabled on the FortiGate.

Show "Auto Connect" Option

Automatically connect the VPN tunnel. This also needs to be enabled on the FortiGate.

On Connect Script

Enable the on connect script. Enter your script. This also needs to be enabled on the FortiGate.

On Disconnect Script

Enable the disconnect script. Enter your script. This also needs to be enabled on the FortiGate.

VPN

Enable or disable the eye icon to show or hide this feature from the end user in FortiClient.

Configuration

Description

VPN

Enable or disable VPN use.

General

 

Allow Personal VPN

Allow users to create, modify, and use personal VPN configurations.

Disable Connect/Disconnect

Enable or disable the Connect/Disconnect button when using Auto Connect with VPN.

Show VPN before Logon

Allow user to select a VPN connection before logging into the system.

Minimize FortiClient Console on Connect

Minimize FortiClient after successfully establishing a connection.

Show Connection Progress

Display information on the FortiClient GUI while establishing connections.

Suppress VPN Notifications

Block FortiClient from displaying any VPN connection or error notifications.

Use Vendor ID

Use vendor ID. Enter the vendor ID in the Vendor ID field.

Current Connection

Select the current VPN tunnel.

Keep Running Max Tries

The maximum number of attempts to retry a VPN connection that was lost due to network issues. If set to 0, it retries indefinitely

SSL VPN

Enable SSL VPN.

DNS Cache Service Control

FortiClient disables Windows DNS cache when an SSL VPN tunnel is established. The DNS cache is restored after the SSL VPN tunnel is disconnected. If it is observed that FSSO clients do not function correctly when an SSL VPN tunnel is up, use Prefer SSL VPN DNS to control the DNS cache.

Prefer SSL VPN DNS

When disabled, the custom DNS server from SSL VPN is not added to the physical interface. When enabled, the custom DNS server from SSL VPN is prepended to the physical interface.

IPsec VPN

Enable IPsec VPN.

 

Enable or disable the following:

  • Beep If Connection Fails
  • Use Windows Store Certificates
    • Current User Windows Store Certificates (IPsec only)
    • Local Computer Windows Store Certificates (IPSec only)
  • Use Smart Card Certificates
  • Show Auth Certificates Only
  • Block IPv6
  • Enable UDP Checksum
  • Disable Default Route
  • Check for Certificate Private Key
  • Enhanced Key Usage Mandatory

The following options are available in the Creating VPN Tunnel window after clicking the Add Tunnel button in the VPN Tunnels section.

Basic Settings

 

Name

Enter a VPN name. Use only standard alphanumeric characters. Do not use symbols or accented characters.

Type

Select SSL VPN or IPsec VPN.

Remote Gateway

Enter the IP address/hostname of the remote gateway. Multiple remote gateways can be configured by separating each entry with a semicolon. If one gateway is not available, the VPN connects to the next configured gateway.

Port

Enter the access port. Available if SSL VPN is selected. The default port is 443.

Require Certificate

Require a certificate. Available if SSL VPN is selected.

Authentication Method

Select the authentication method for the VPN. Available if IPsec VPN is selected.

Pre-Shared Key

Enter the preshared key required. Available if Pre-Shared Key is selected for Authentication Method.

Prompt for Username

Prompt for the username when accessing VPN.

VPN Settings

Available if IPsec VPN is selected for the VPN type.

Mode

Select Main or Aggressive.

Options

Select Mode Config, Manual Set, or DHCP over IPsec.

Specify DNS Server (IPv4)

Specify the DNS server for the VPN tunnel. Available if Manual Set is selected.

Assign IP Address (IPv4)

Enter the IP address to assign for the VPN tunnel. Available if Manual Set is selected.

Split Table

Enter the IP address and subnet mask for the VPN tunnel. Available if Manual Set or DHCP over IPsec is selected.

Phase 1

Available if IPsec VPN is selected for the VPN type.

Select the encryption and authentication algorithms used to generate keys for protecting negotiations and add encryption and authentication algorithms as required.

You need to select a minimum of one and a maximum of two combinations. The remote peer or client must be configured to use at least one of the proposals that you define.

Encryption

Select the encryption standard.

Authentication

Select the authentication method.

DH Groups

Select one or more Diffie-Hellman groups from DH group 1, 2, 5, 14, 15, 16, 17, 18, 19 and 20. At least one of the DH Group settings on the remote peer or client must match one the selections on the FortiGate. Failure to match one or more DH groups results in failed negotiations.

Key Life

Enter the time (in seconds) that must pass before the IKE encryption key expires. When the key expires, a new key is generated without interrupting service. The key life can be from 120 to 172,800 seconds.

Local ID

Enter the local ID.

Enable Implied SPDO

Enable implied SPDO. Enter the timeout in seconds.

Dead Peer Detection

Select this checkbox to reestablish VPN tunnels on idle connections and clean up dead IKE peers if required.

NAT Traversal

Select the checkbox if a NAT device exists between the client and the local FortiGate. The client and the local FortiGate must have the same NAT traversal setting (both selected or both cleared) to connect reliably.

Enable Local LAN

Enable local LAN.

Enable IKE Fragmentation

Enable IKE fragmentation.

Phase 2

Available if IPsec VPN is selected for the VPN type.

Select the encryption and authentication algorithms that is proposed to the remote VPN peer. You can specify up to two proposals. To establish a VPN connection, at least one of the proposals that you specify must match configuration on the remote peer.

Encryption

Select the encryption standard.

Authentication

Select the authentication method.

DH Group

Select one Diffie-Hellman (DH) group (1, 2, 5, 14, 15, 16, 17, 18, 19 or 20). This must match the DH Group that the remote peer or dialup client uses.

Key Life

The Key Life setting sets a limit on the length of time that a phase 2 key can be used. The default units are seconds. Alternatively, you can set a limit on the number of kilobytes (KB) of processed data, or both. If you select both, the key expires when either the time has passed or the number of KB have been processed. When the phase 2 key expires, a new key is generated without interrupting service.

Enable Replay Detection

Replay detection enables the unit to check all IPsec packets to see if they have been received before. If any encrypted packets arrive out of order, the unit discards them.

Enable Perfect Forward Secrecy (PFS)

Select the checkbox to enable Perfect forward secrecy (PFS). PFS forces a new Diffie-Hellman exchange when the tunnel starts and whenever the phase 2 key life expires, causing a new key to be generated each time.

Auto Keep Alive

Enable auto keep alive.

Allow non-administrators to use machine certificates

Allow non-administrator users to use local machine certificates.

Advanced Settings

 

Enable One-Time Password

Enable one-time password. Available if IPsec VPN is selected for the VPN type.

Enable XAuth

Enable IKE Extended Authentication (xAuth). Available if IPsec VPN is selected for the VPN type.

XAuth Timeout

Only available if Enable XAuth is enabled. Configure the IKE Extended Authentication (xAuth) timeout in seconds. Default value is two minutes if not configured. Enter a value between 120 and 300 seconds.

Prompt for Certificate

Prompt the user for the certificate. Available if IPsec VPN is selected for the VPN type.

Enable Single User Mode

Enable Single User Mode.

Show Passcode

Display Passcode instead of Password in the VPN tab on the FortiClient console.

Enable Invalid Server Certificate Warning

Display a warning to the user that the certificate is invalid before attempting VPN connection. Available if SSL VPN is selected for the VPN type.

Save Username

Save your username.

Allow Non-Administrators to Use Machine Certificates

Allow non-administrator users to use local machine certificates. Available if SSL VPN is selected for the VPN type.

Show "Remember Password" Option

Have the VPN tunnel remember the password.

Show "Always Up" Option

Have the VPN tunnel always up. This also needs to be enabled on the FortiGate.

Show "Auto Connect" Option

Automatically connect the VPN tunnel. This also needs to be enabled on the FortiGate.

On Connect Script

Enable the on connect script. Enter your script. This also needs to be enabled on the FortiGate.

On Disconnect Script

Enable the disconnect script. Enter your script. This also needs to be enabled on the FortiGate.