Running FortiClient iOS
After downloading the FortiClient installer and running the application for the first time, you must acknowledge some popups before continuing to add a VPN configuration. Acknowledge the notifications shown below.
To add a VPN connection:
- In the Add VPN Configurations popup, tap Allow.
- Tap the VPN icon at the bottom of the screen to switch to the VPN page.
- Tap Connections > Edit > Add Configuration, then configure the following. Enter your passcode to confirm adding the VPN.
- Tap Done twice.
The Name, Host and Port fields are required. The User, Hide invalid certificate warning, and User Certificate fields are optional. |
To enable a VPN connection:
- Tap a VPN connection. A checkmark appears beside the VPN connection to indicate it is selected.
- Tap the < button.
- Swipe right to enable the VPN connection.
- If the username and password are not configured, enter the username and passcode in the popup.
- Tap OK. When connected, the tunnel interface IP, duration, and the bytes sent and received information display.
To disable a VPN connection:
- Select the VPN connection.
- Swipe left to disable the VPN connection.
To edit or delete a VPN connection:
- Select a VPN connection.
- Tap Edit or Delete.
- Tap Done twice.