- Go to System Settings > Fortinet Services.
- Configure the following options:
Configure FortiGuard server location to Nearest or US.
If you select US, FortiClient EMS can only connect to FortiGuard servers available in the United States and does not attempt to access a FortiGuard server outside the U.S.
Use FortiManager for client software/signature updates
Turn on to use FortiManager or Micro-FortiGuard Server for FortiClient for updating FortiClient software or signatures. You must specify the IP address or hostname for FortiManager or Micro-FortiGuard Server for FortiClient as well as the port number.
Enter the IP address/hostname.
Configure the port number.
Configure the failover port.
Configure the timeout interval (in seconds).
Enable failover to FDN when FortiManager or Micro-FortiGuard Server for FortiClient is unavailable.
Select the FortiCloud region from the dropdown list.
Select the FortiCloud time offset from the dropdown list.
Select the FortiSASE desired synchronization frequency.
Configure the day the scan will run. This only applies if the schedule type is configured to Weekly or Monthly. Select a day of the week (Sunday through Monday) or a day of the month (1st through the 31st).
Configure the time the scan will start.
- Click Save.