Connecting FortiClient Telemetry after installation
After FortiClient software installation completes on an endpoint, FortiClient automatically launches and connects Telemetry to the EMS server that created the installed deployment package.
To connect to an on-premise EMS:
- When FortiClient locates EMS, the Connecting FortiClient Telemetry dialog displays when EMS requests the FortiClient telemetry connection key.
The following options are available:
Displays the name of the endpoint user logged into the endpoint.
Logged into Domain
Displays the domain name if applicable.
Displays the endpoint name.
FortiClient Telemetry Connection Key
Enter the connection key.
Remember FortiClient Telemetry Connection Key
Select for FortiClient to remember the connection key.
Remember this Endpoint Management Server (EMS)
Select for FortiClient to remember the IP address of the EMS you are connecting Telemetry to. See Remembering gateway IP addresses.
- Click OK to connect FortiClient Telemetry to the identified EMS.
After FortiClient Telemetry is connected to EMS, FortiClient receives an endpoint policy from EMS. A system tray bubble message displays once the download is complete. The endpoint policy may contain an endpoint profile of configuration information as well as a Telemetry server list.
You can also manually enter the EMS IP address on the Zero Trust Telemetry tab, in the Register with Security Fabric field.
FortiClient uses the same process to connect Telemetry to EMS after the FortiClient endpoint reboots, rejoins the network, or encounters a network change.
To connect to EMS Cloud:
- After initial installation, FortiClient should automatically register to FortiClient Cloud. If FortiClient did not automatically register to FortiClient Cloud, enter the invitation code in the Join FortiClient Cloud field on the Zero Trust Telemetry tab in FortiClient. Your EMS administrator should have provided the code to you.
- Click Connect. FortiClient is managed by FortiClient Cloud.