Example single chassis management IP addresses and port numbers
Use the special port numbers below to manage the devices in an SLBC that includes one or two FortiControllers and multiple workers installed in one chassis with External Management IP address 10.10.10.1:
-
To manage the primary worker using HTTPS browse to:
https://10.10.10.1
-
To manage the FortiController in slot 1 using HTTPS, browse to the following address. This is usually the primary FortiController.
https://10.10.10.1:44301
-
To manage the FortiController in slot 2 using HTTPS, browse to the following address. This is usually the secondary FortiController and this is the only way to use HTTPS to manage the secondary FortiController.
https://10.10.10.1:44302
-
To manage the worker in slot 4 using HTTPS browse to:
https://10.10.10.1:44304
-
To manage the worker in slot 14 using HTTP browse to:
http://10.10.10.1:8014
-
To manage the worker in slot 12 using SSH, enter a command similar to:
ssh admin@10.10.10.1 -p2212 -
To manage the worker in slot 5 using telnet, enter a command similar to:
telnet 10.10.10.1 2305 - To use SNMP to query the FortiController in slot 1 use port 16101 in the SNMP query.
- To use SNMP to query the FortiController in slot 2 use port 16102 in the SNMP query.
- To use SNMP to query a worker in slot 7 use port 16107 in the SNMP query.