Fortinet black logo

Session-Aware Load Balancing Cluster Guide

Factory default settings

5.2.10
Copy Link
Copy Doc ID 31a89d05-200d-11e9-b6f6-f8bc1258b856:466667
Download PDF

Factory default settings

The FortiController unit ships with a factory default configuration. The default configuration allows you to connect to and use the FortiController GUI or CLI to configure the FortiController.

To configure the FortiController you should add a password for the admin administrator account, change the management interface IP address, and, if required, configure the default route for the management interface.

FortiController factory default settings
Administrator Account User Name admin
Password (none)
MGMT IP/Netmask 192.168.1.99/24

At any time during the configuration process, if you run into problems, you can reset the FortiController or the FortiGates to factory default settings and start over. From the CLI enter execute factory-reset.

Factory default settings

The FortiController unit ships with a factory default configuration. The default configuration allows you to connect to and use the FortiController GUI or CLI to configure the FortiController.

To configure the FortiController you should add a password for the admin administrator account, change the management interface IP address, and, if required, configure the default route for the management interface.

FortiController factory default settings
Administrator Account User Name admin
Password (none)
MGMT IP/Netmask 192.168.1.99/24

At any time during the configuration process, if you run into problems, you can reset the FortiController or the FortiGates to factory default settings and start over. From the CLI enter execute factory-reset.