Example management IP addresses and port numbers for two chassis and two or four FortiControllers
Use the special port numbers below to manage the devices in an SLBC that includes two or four FortiControllers and multiple workers installed in two chassis with External Management IP address 10.10.10.1:
-
To manage the primary worker using HTTPS browse to the external management IP address. (This worker may be in chassis 1 or chassis 2.)
https://10.10.10.1
-
To manage the FortiController in chassis 1 slot 1 using HTTPS, browse to the following address. This is usually the primary FortiController.
https://10.10.10.1:44301
-
To manage the FortiController in chassis 1 slot 2 using HTTPS, browse to the following address.
https://10.10.10.1:44302
-
To manage the FortiController in chassis 2 slot 1 using HTTPS, browse to the following address.
https://10.10.10.1:44321
-
To manage the FortiController in chassis 2 slot 2 using HTTPS, browse to the following address.
https://10.10.10.1:44322
-
To manage the worker in chassis 1 slot 10 using HTTPS browse to:
https://10.10.10.1:44310
-
To manage the worker in chassis 2 slot 5 using HTTP browse to:
http://10.10.10.1:8025
-
To manage the worker in chassis 2 slot 13 using HTTP browse to:
http://10.10.10.1:8033
-
To manage the worker in chassis 1 slot 8 using SSH, enter a command similar to:
ssh admin@10.10.10.1 -p2208 -
To manage the worker in chassis 2 slot 5 using telnet, enter a command similar to:
telnet 10.10.10.1 2325 - To use SNMP to query the FortiController in chassis 1 slot 1 use port 16101 in the SNMP query.
- To use SNMP to query the FortiController in chassis 2 slot 2 use port 16122 in the SNMP query.
- To use SNMP to query a worker in chassis 1 slot 7 use port 16107 in the SNMP query.
- To use SNMP to query a worker in chassis 2 slot 11 use port 16131 in the SNMP query.