Set up the Monitored Network
The Monitored Network page allows administrators to set up a monitoring interface into a VLAN or a subnet.
To add a VLAN or subnet to FortiDeceptor:
- Go to Deception > Monitored Network.
- Select Auto VLAN Detection to automatically detect the VLANs on your network.
- Select the Detection Interface. You can select multiple ports from Port 2 to Port 8. Click OK.
- Click Add New VLAN/Subnet to manually add a VLAN or a subnet to FortiDeceptor. Configure the following settings:
The port that will connect to the VLAN or subnet.
Specify an integer to assign a unique ID to the VLAN.
Deception Monitor IP/Mask
Shows the number of objects referring to this object.
Status Shows if the IP address is initialized.
Click Edit to edit the VLAN or Subnet entry. The Edit button is visible only after the entry is saved.
- Click Save.
The Monitor IP/Mask must be set as an IP address and not as a subnet.