Fortinet Document Library

Version:


Table of Contents

1.0.1
Download PDF
Copy Link

Configure a Whitelist

The Whitelist page is used to add an IP address that can be used by an administrator to log into the network. Actions of the users from a whitelisted IP address will not be recorded as an Event or Incident by FortiDeceptor.

To add a new whitelist IP:
  1. Go to Deception > Whitelist.
  2. Click Add New Whitelist IP.
  3. Configure the following settings:
    IP Address Specify the IP address from where the connection originates. This field is mandatory.
    Source Port Specify the source port from where the connection originates.
    Destination Port Specify the destination port on the network where the connection terminates.
    Description Specify a description. For example, you can name it as Safe_Network.
    Services Select the name of the services used to connect to the network.
    Status Select Enabled or Disabled.
  4. Click Update.

Configure a Whitelist

The Whitelist page is used to add an IP address that can be used by an administrator to log into the network. Actions of the users from a whitelisted IP address will not be recorded as an Event or Incident by FortiDeceptor.

To add a new whitelist IP:
  1. Go to Deception > Whitelist.
  2. Click Add New Whitelist IP.
  3. Configure the following settings:
    IP Address Specify the IP address from where the connection originates. This field is mandatory.
    Source Port Specify the source port from where the connection originates.
    Destination Port Specify the destination port on the network where the connection terminates.
    Description Specify a description. For example, you can name it as Safe_Network.
    Services Select the name of the services used to connect to the network.
    Status Select Enabled or Disabled.
  4. Click Update.