Introduction

The FortiDeceptor Command Line Interface (CLI) is accessed when connecting to the FortiDeceptor via console or using an SSH or TELNET client. These services must be enabled on the port1 interface.

The CLI commands are intended to be used for initial device configuration and troubleshooting. Some commands are specific to hardware or VM devices. Use ? or help with system commands for information on how to use the command.

An administrator's privilege to execute CLI commands is defined by their admin profile. The specific commands that are available to them are configured when creating or editing a profile.

The FortiDeceptor CLI is case-sensitive.

Introduction

The FortiDeceptor Command Line Interface (CLI) is accessed when connecting to the FortiDeceptor via console or using an SSH or TELNET client. These services must be enabled on the port1 interface.

An administrator's privilege to execute CLI commands is defined by their admin profile. The specific commands that are available to them are configured when creating or editing a profile.

The FortiDeceptor CLI is case-sensitive.

CLI Reference Guide

Introduction

Introduction

Introduction