Fortinet Document Library

Version:


Table of Contents

1.1.0
Download PDF
Copy Link

Introduction

The FortiDeceptor Command Line Interface (CLI) is accessed when connecting to the FortiDeceptor via console or using an SSH or TELNET client. These services must be enabled on the port1 interface.

The CLI commands are intended to be used for initial device configuration and troubleshooting. Some commands are specific to hardware or VM devices. Use ? or help to view a description of all of the available commands. Use ? or help with a system command for information on how to use that command. Use exit to exit from the CLI.

An administrator's privilege to execute CLI commands is defined by their admin profile. The specific commands that are available to them are configured when creating or editing a profile.

note icon

The FortiDeceptor CLI is case-sensitive.

Introduction

The FortiDeceptor Command Line Interface (CLI) is accessed when connecting to the FortiDeceptor via console or using an SSH or TELNET client. These services must be enabled on the port1 interface.

The CLI commands are intended to be used for initial device configuration and troubleshooting. Some commands are specific to hardware or VM devices. Use ? or help to view a description of all of the available commands. Use ? or help with a system command for information on how to use that command. Use exit to exit from the CLI.

An administrator's privilege to execute CLI commands is defined by their admin profile. The specific commands that are available to them are configured when creating or editing a profile.

note icon

The FortiDeceptor CLI is case-sensitive.