Fortinet black logo

Administration Guide

Home FortiDeceptor 2.1.0 Administration Guide

Monitor Decoy & Lure Status

2.1.0
5.3.0
5.2.0
5.1.0
5.0.0
4.3.0
4.2.0
4.1.1
4.1.0
4.0.2
4.0.1
4.0.0
3.3.3
3.3.2
3.3.1
3.3.0
3.2.2
3.2.1
3.2.0
3.1.1
3.1.0
3.0.2
3.0.1
3.0.0
2.1.0
2.0.0
1.1.0
1.0.1
Copy Link
Copy Doc ID 52ca6fc9-c9b4-11e9-8977-00505692583a:874567
Download PDF

Monitor Decoy & Lure Status

The Decoy & Lure Status page shows the status of the decoys deployed on your network.

To view the Deception Status:
  1. Go to Deception > Decoy & Lure Status.
  2. The following information is shown:
    Action Click View to view details of the decoy. Click Start or Stop to start or stop the decoy. Click Delete to delete the decoy.
    Status The current status of the decoy is shown as Running, Stopped, or Cannot Start. If the Decoy VM cannot start, hover over the VM to see the reason for failure to start.
    Name Name of the decoy.
    OS Operating system of the decoy whether Ubuntu or Windows.
    VM The name of the Decoy VM.
    Enabled Decoys The number of decoys enabled on this VM.
    IP The IP address of the Decoy VM.

    Services

    List of Services enabled. Mouse hovering displays a text list.
    Network Type Shows if the IP address is Static or Dynamic.

    DNS

    Shows the DNS.

    Gateway

    Shows the gateway.

To delete one or more Decoy VMs:
  1. Go to Deception > Decoy & Lure Status.
  2. Select the Decoy VM.
  3. Click Delete.
  4. Click OK.
To start one or more Decoy VM:
  1. Go to Deception > Decoy & Lure Status.
  2. Select one or more Decoy VMs that are stopped.
  3. Click Start.
To stop one or more Decoy VMs:
  1. Go to Deception > Decoy & Lure Status.
  2. Select one or more Decoy VMs that are running.
  3. Click Stop.

It is recommended to operate the Decoy VMs with the same status for expected behavior.

Previous
Next

Monitor Decoy & Lure Status

The Decoy & Lure Status page shows the status of the decoys deployed on your network.

To view the Deception Status:
  1. Go to Deception > Decoy & Lure Status.
  2. The following information is shown:
    Action Click View to view details of the decoy. Click Start or Stop to start or stop the decoy. Click Delete to delete the decoy.
    Status The current status of the decoy is shown as Running, Stopped, or Cannot Start. If the Decoy VM cannot start, hover over the VM to see the reason for failure to start.
    Name Name of the decoy.
    OS Operating system of the decoy whether Ubuntu or Windows.
    VM The name of the Decoy VM.
    Enabled Decoys The number of decoys enabled on this VM.
    IP The IP address of the Decoy VM.

    Services

    List of Services enabled. Mouse hovering displays a text list.
    Network Type Shows if the IP address is Static or Dynamic.

    DNS

    Shows the DNS.

    Gateway

    Shows the gateway.

To delete one or more Decoy VMs:
  1. Go to Deception > Decoy & Lure Status.
  2. Select the Decoy VM.
  3. Click Delete.
  4. Click OK.
To start one or more Decoy VM:
  1. Go to Deception > Decoy & Lure Status.
  2. Select one or more Decoy VMs that are stopped.
  3. Click Start.
To stop one or more Decoy VMs:
  1. Go to Deception > Decoy & Lure Status.
  2. Select one or more Decoy VMs that are running.
  3. Click Stop.

It is recommended to operate the Decoy VMs with the same status for expected behavior.

Previous
Next