Fortinet black logo

Cookbook

Editing the SSL VPN portal

Copy Link
Copy Doc ID 4d801240-7ccc-11e9-81a4-00505692583a:941552
Download PDF

Editing the SSL VPN portal

  1. Go to VPN > SSL-VPN Portals and edit the full-access SSL VPN portal that allows the use of tunnel mode and web mode.
  2. Under Tunnel Mode, disable Enable Split Tunneling for both IPv4 and IPv6 traffic so that all Internet traffic goes through the FortiGate.
  3. Set Source IP Pools to use the default IP range SSLVPN_TUNNEL_ADDR1.

  4. Under Enable Web Mode, create Predefined Bookmarks for any internal resources that SSL VPN users need to access.

    In this example, the bookmark allows the remote user RDP access to a computer on the internal network.

Editing the SSL VPN portal

  1. Go to VPN > SSL-VPN Portals and edit the full-access SSL VPN portal that allows the use of tunnel mode and web mode.
  2. Under Tunnel Mode, disable Enable Split Tunneling for both IPv4 and IPv6 traffic so that all Internet traffic goes through the FortiGate.
  3. Set Source IP Pools to use the default IP range SSLVPN_TUNNEL_ADDR1.

  4. Under Enable Web Mode, create Predefined Bookmarks for any internal resources that SSL VPN users need to access.

    In this example, the bookmark allows the remote user RDP access to a computer on the internal network.