Fortinet black logo

Cookbook

Home FortiGate / FortiOS 6.0.0 Cookbook

Configuring tunnel interfaces

6.0.0
6.2.16
6.2.15
6.2.14
6.2.13
6.2.12
6.2.11
6.2.10
6.2.9
6.2.8
6.2.7
6.2.6
6.2.5
6.2.4
6.2.3
6.2.2
6.2.0
6.0.0
5.6.0
5.4.0
Copy Link
Copy Doc ID a4a06ec3-12a7-11e9-b86b-00505692583a:75456
Download PDF

Configuring tunnel interfaces

  1. To configure Edge to listen for FortiTelemetry traffic over the VPN, connect to Edge, go to Network > Interfaces, and edit the tunnel interface.
  2. Set IP to the local IP address for this interface (10.10.10.1) and Remote IP/Network mask to the IP address for the Branch tunnel interface (10.10.10.2/32).
  3. Under Administrative Access, enable FortiTelemetry.

  4. Connect to Branch, go to Network > Interfaces, and edit the tunnel interface.
  5. Set IP to the local IP address for this interface (10.10.10.2) and Remote IP/Network mask to the IP address for the Edge tunnel interface (10.10.10.1/32).

Previous
Next

Configuring tunnel interfaces

  1. To configure Edge to listen for FortiTelemetry traffic over the VPN, connect to Edge, go to Network > Interfaces, and edit the tunnel interface.
  2. Set IP to the local IP address for this interface (10.10.10.1) and Remote IP/Network mask to the IP address for the Branch tunnel interface (10.10.10.2/32).
  3. Under Administrative Access, enable FortiTelemetry.

  4. Connect to Branch, go to Network > Interfaces, and edit the tunnel interface.
  5. Set IP to the local IP address for this interface (10.10.10.2) and Remote IP/Network mask to the IP address for the Edge tunnel interface (10.10.10.1/32).

Previous
Next