Fortinet black logo

Handbook

Changing the port numbers that the SIP ALG listens on

6.0.0
Copy Link
Copy Doc ID 4afb0436-a998-11e9-81a4-00505692583a:168355
Download PDF

Changing the port numbers that the SIP ALG listens on

Most SIP configurations use TCP or UDP port 5060 for SIP sessions and port 5061 for SIP SSL sessions. If your SIP network uses different ports for SIP sessions you can use the following command to configure the SIP ALG to listen on a different TCP, UDP, or SSL ports. For example, to change the TCP port to 5064, the UDP port to 5065, and the SSL port to 5066.

config system settings

set sip-tcp-port 5064

set sip-udp-port 5065

set sip-ssl-port 5066

end

You also configure the SIP ALG to listen in two different TCP ports and two different UDP ports for SIP sessions. For example, if you receive SIP TCP traffic on port 5060 and 5064 and UDP traffic on ports 5061 and 5065 you can enter the following command to receive the SIP traffic on all of these ports:

config system settings

set sip-tcp-port 5060 5064

set sip-udp-port 5061 5065

end

Changing the port numbers that the SIP ALG listens on

Most SIP configurations use TCP or UDP port 5060 for SIP sessions and port 5061 for SIP SSL sessions. If your SIP network uses different ports for SIP sessions you can use the following command to configure the SIP ALG to listen on a different TCP, UDP, or SSL ports. For example, to change the TCP port to 5064, the UDP port to 5065, and the SSL port to 5066.

config system settings

set sip-tcp-port 5064

set sip-udp-port 5065

set sip-ssl-port 5066

end

You also configure the SIP ALG to listen in two different TCP ports and two different UDP ports for SIP sessions. For example, if you receive SIP TCP traffic on port 5060 and 5064 and UDP traffic on ports 5061 and 5065 you can enter the following command to receive the SIP traffic on all of these ports:

config system settings

set sip-tcp-port 5060 5064

set sip-udp-port 5061 5065

end