Fortinet black logo

Handbook

Connecting using a web browser

6.0.0
Copy Link
Copy Doc ID 4afb0436-a998-11e9-81a4-00505692583a:890065
Download PDF

Connecting using a web browser

note icon

The graphical user interface is best displayed using a 1280 x 1024 resolution. Check the FortiOS Release Notes for information about browser compatibility.

In order to connect to the GUI using a web browser, an interface must be configured to allow administrative access over HTTPS or over both HTTPS and HTTP. By default, an interface has already been set up that allows HTTPS access, with the IP address 192.168.1.99.

Browse to https://192.168.1.99 and enter your username and password. If you have not changed the admin account’s password, use the default user name, admin, and leave the password field blank.

The GUI will now be displayed in your browser.

If you wish to use a different interface to access the GUI, do the following:

  1. Go to Network > Interfaces and edit the interface you wish to use for access. Take note of its assigned IP address.
  2. Beside Administrative Access, select HTTPS, and any other protocol you require. You can also select HTTP, although this is not recommended as the connection will be less secure.
  3. Select OK.
  4. Browse to the IP address using your chosen protocol.
Results

The GUI will now be displayed in your browser.

Connecting using a web browser

note icon

The graphical user interface is best displayed using a 1280 x 1024 resolution. Check the FortiOS Release Notes for information about browser compatibility.

In order to connect to the GUI using a web browser, an interface must be configured to allow administrative access over HTTPS or over both HTTPS and HTTP. By default, an interface has already been set up that allows HTTPS access, with the IP address 192.168.1.99.

Browse to https://192.168.1.99 and enter your username and password. If you have not changed the admin account’s password, use the default user name, admin, and leave the password field blank.

The GUI will now be displayed in your browser.

If you wish to use a different interface to access the GUI, do the following:

  1. Go to Network > Interfaces and edit the interface you wish to use for access. Take note of its assigned IP address.
  2. Beside Administrative Access, select HTTPS, and any other protocol you require. You can also select HTTP, although this is not recommended as the connection will be less secure.
  3. Select OK.
  4. Browse to the IP address using your chosen protocol.
Results

The GUI will now be displayed in your browser.