Known issues
The following issues have been identified in version 7.2.0. To inquire about a particular bug or report a bug, please contact Customer Service & Support.
Anti Virus
|
Bug ID |
Description |
|---|---|
|
869398 |
FortiGate sends too many unnecessary requests to FortiSandbox and causes high resource usage. |
Firewall
|
Bug ID |
Description |
|---|---|
|
794648 |
Cannot set |
FortiView
|
Bug ID |
Description |
|---|---|
|
787886 |
The tooltip for the Bandwidth column always displays the receiving bandwidth as zero on the Dashboard > FortiView Traffic Shaping page. |
GUI
|
Bug ID |
Description |
|---|---|
|
677806 |
On the Network > Interfaces page when VDOM mode is enabled, the Global view incorrectly shows the status of IPsec tunnel interfaces from non-management VDOMs as up. The VDOM view shows the correct status. |
|
695163 |
When there are a lot of historical logs from FortiAnalyzer, the FortiGate GUI Forward Traffic log page can take time to load if there is no specific filter for the time range. Workaround: provide a specific time range filter, or use the FortiAnalyzer GUI to view the logs. |
|
778844 |
Dashboard and Managed FortiAPs pages can take a long time to load when there are over 1000 FortiAPs configured. |
|
781310 |
Policy & Objects > DNAT & Virtual IPs page can take more than 30 seconds to load if there are more than 25 thousand virtual IPs. |
IPsec VPN
|
Bug ID |
Description |
|---|---|
|
763205 |
IKE crashes after HA failover when the |
Log & Report
|
Bug ID |
Description |
|---|---|
|
770352 |
On the Log & Report > Forward Traffic page, filters applied to an interface name with a comma (,) do not show the correct filtered results for that interface. |
Proxy
|
Bug ID |
Description |
|---|---|
|
766158 |
Video filter FortiGuard category takes precedence over allowed channel ID exception in the same category. |
Security Fabric
|
Bug ID |
Description |
|---|---|
|
614691 |
Slow GUI performance in large Fabric topology with over 50 downstream devices. |
|
741084 |
Entry-level FortiGate with Security Fabric enabled for 30 or more downstream FortiGates can go into conserve mode when loading the physical or logical topology pages, or running security rating reports. Workaround: configure fewer downstream FortiGates in a Security Fabric configuration. |
|
825291 |
On the Security Fabric > Security Rating page, security rating test for FortiAnalyzer fails when connected to FortiAnalyzer Cloud. |
SSL VPN
|
Bug ID |
Description |
|---|---|
|
795381 |
FortiClient Windows cannot be launched with SSL VPN web portal. |
|
819754 |
Multiple DNS suffixes cannot be set for the SSL VPN portal. |
System
|
Bug ID |
Description |
|---|---|
|
847077 |
|
|
1041457 |
The kernel 4.19 cannot concurrently reassemble IPv4 fragments for a source IP with more than 64 destination IP addresses. |
Upgrade
|
Bug ID |
Description |
|---|---|
|
925567 |
When upgrading multiple firmware versions in the GUI, the Follow upgrade path option does not respect the recommended upgrade path. |
User & Authentication
|
Bug ID |
Description |
|---|---|
|
754725 |
After updating the FSSO DC agent to version 5.0.0301, the DC agent keeps crashing on Windows 2012 R2 and 2016, which causes lsass.exe to reboot. |
VM
|
Bug ID |
Description |
|---|---|
|
764392 |
Incorrect VMDK file size in the OVF file for hw13 and hw15. Workaround: manually correct the hw13 and hw15 OVF file's |
Web Filter
|
Bug ID |
Description |
|---|---|
|
766126 |
Block replacement page is not pushed automatically to replace the video content when using a video filter. |
ZTNA
|
Bug ID |
Description |
|---|---|
|
792829 |
WAD re-challenges user authentication upon HA failover. |