Configuring high availability
FortiIsolator supports high availability and A-A clustering. You can deploy devices in a cluster, and distribute traffic using Round Robin or Weighted Round Robin load balancing. You can use the FortiIsolator UI or FortiIsolator CLI to configure high availability.
FortiIsolator UI
To configure high availability, go to System > HA.
FortiIsolator CLI
To configure high availability, use the following CLI commands:
ha-enabled 0/1
ha-group-id [1-255]
ha-lost-threshold [1-60]
ha-interval [1-20]
in unit of 100ms
ha-hello-holddown [5-300]
in unit of seconds
ha-priority [0-255]
255 means not used
ha-allow-override 0/1
ha-schedule <schedule type>
ha-virtual-ip <IP/netmask>
e.g. 192.168.100.2/24
ha-password <PASSWORD>
ha-password-enc <Encoded PASSWORD>
ha-interface <Interface Name >
e.g. internal/external/mgmt
After you enable or disable high availability, you must restart FortiIsolator.
