Creating FortiSwitch security policies
To create a FortiSwitch security policy:
- On the FortiSwitch Security Policies pane, click Create New in the toolbar. The Create New Security Policies window opens.
- Enter the following information, then click OK to create the new security policy.
Name
Type a name for the template.
Security mode
Select the security mode, Port-based or MAC-based.
User groups
Select the user groups that the security policy will apply to.
Guest VLAN
Enable a guest VLAN, and select the VLAN from the available VLAN objects. See FortiSwitch VLANs.
Guest authentication delay
Set the guest authentication delay, in seconds (1 - 900, default = 30).
Authentication fail VLAN
Enable an authentication failure VLAN, and select the VLAN from the available VLAN objects. See FortiSwitch VLANs.
This option is not available when Security mode is MAC-based.
MAC authentication bypass
Enable MAC Authentication Bypass (MAB).
EAP pass-through
Enable EAP pass-through. Override RADIUS timeout
Enable overriding the RADIUS timeout.