Fortinet black logo

Release Notes

Known Issues

Known Issues

The following issues have been identified in 6.0.8. For inquires about a particular bug or to report a bug, please contact Customer Service & Support.

AP Manager

Bug ID

Description

595674 When attempting to place an AP on a map, there is a considerable border around map image and it is not possible to place an AP to the far right or complete bottom of the floor.
600899 FortiManager is unable to delete WiFi profile with a forward slash in the name.

Device Manager

Bug ID

Description

555635 Certificate is not visible on GUI after restoring the configuration, which was exported from FortiManager.
586809 FortiManager incorrectly counts VDOM licenses for FortiGate 7000 series.
598916 When creating user groups via CLI Only Objects, comma separated values are treated as a string instead of a list.

Others

Bug ID

Description

581140 The SNMP, FmDeviceEntPolicyPackageState, always returns (-1), which indicates never installed, regardless of the actual policy package status.
591206 The SNMP trap, fmDeviceTable, should show VDOM information as well.

Policy and Objects

Bug ID

Description

505887 Internet Service should separate into source and destination.
545759 "From" or "To" column filter displays unmapped interfaces in the drop-down list.
574560 Installation from FortiManager may fail with the error, "No response from remote" FortiGate.
577199 Importing policy package does not add interfaces in dynamic mappings for zone if the zone mapping is empty.
577201 Next button should be inactive until zone validation is fixed in the case of 'Re-Install Policy'.
577660 Despite table limits on firewall central-nat of 300k-max and 30K-per VDOMs, FortiManager still shows 10k limit reached error.
578004 The policy interface colors are different between Device Manager and Policy & Objects.
581825 In workflow mode, changes to the SSL VPN portals do not trigger "Modified" status on the policy package.
598913 Deleting a policy will bring user to the top of the policy package instead of remaining in the same position.
598938 FortiManager should allow setting wildcard-fqdn type firewall address as destination on proxy policy.
599780 If one or more devices has a policy validation error, FortiManager does not show devices that are "ready to install".
602600 FortiManager may show any duplicate sections in the policy page.

Revision History

Bug ID

Description

473517 FortiManager should have a proper progress bar for device install preview.
543507 Install fails for newly defined transparent VDOM's management IP.
584118 Router access-list rule's default value is mismatched causing installation failure.
586275 Policy Package Diff does not show user or admin details.
591818 Install fails with 'No response from remote' when making addrgrp changes.
597650 FortiManager cannot install allowed DNS and URL threat feed configuration.
602272 Installing UUIDs from local-in policies for FortiGate-60F may cause installation failure.

System Settings

Bug ID

Description

571181 An admin user with read-write system permissions and restricted to one ADOM can change their permission to All ADOMs.

Known Issues

Known Issues

The following issues have been identified in 6.0.8. For inquires about a particular bug or to report a bug, please contact Customer Service & Support.

AP Manager

Bug ID

Description

595674 When attempting to place an AP on a map, there is a considerable border around map image and it is not possible to place an AP to the far right or complete bottom of the floor.
600899 FortiManager is unable to delete WiFi profile with a forward slash in the name.

Device Manager

Bug ID

Description

555635 Certificate is not visible on GUI after restoring the configuration, which was exported from FortiManager.
586809 FortiManager incorrectly counts VDOM licenses for FortiGate 7000 series.
598916 When creating user groups via CLI Only Objects, comma separated values are treated as a string instead of a list.

Others

Bug ID

Description

581140 The SNMP, FmDeviceEntPolicyPackageState, always returns (-1), which indicates never installed, regardless of the actual policy package status.
591206 The SNMP trap, fmDeviceTable, should show VDOM information as well.

Policy and Objects

Bug ID

Description

505887 Internet Service should separate into source and destination.
545759 "From" or "To" column filter displays unmapped interfaces in the drop-down list.
574560 Installation from FortiManager may fail with the error, "No response from remote" FortiGate.
577199 Importing policy package does not add interfaces in dynamic mappings for zone if the zone mapping is empty.
577201 Next button should be inactive until zone validation is fixed in the case of 'Re-Install Policy'.
577660 Despite table limits on firewall central-nat of 300k-max and 30K-per VDOMs, FortiManager still shows 10k limit reached error.
578004 The policy interface colors are different between Device Manager and Policy & Objects.
581825 In workflow mode, changes to the SSL VPN portals do not trigger "Modified" status on the policy package.
598913 Deleting a policy will bring user to the top of the policy package instead of remaining in the same position.
598938 FortiManager should allow setting wildcard-fqdn type firewall address as destination on proxy policy.
599780 If one or more devices has a policy validation error, FortiManager does not show devices that are "ready to install".
602600 FortiManager may show any duplicate sections in the policy page.

Revision History

Bug ID

Description

473517 FortiManager should have a proper progress bar for device install preview.
543507 Install fails for newly defined transparent VDOM's management IP.
584118 Router access-list rule's default value is mismatched causing installation failure.
586275 Policy Package Diff does not show user or admin details.
591818 Install fails with 'No response from remote' when making addrgrp changes.
597650 FortiManager cannot install allowed DNS and URL threat feed configuration.
602272 Installing UUIDs from local-in policies for FortiGate-60F may cause installation failure.

System Settings

Bug ID

Description

571181 An admin user with read-write system permissions and restricted to one ADOM can change their permission to All ADOMs.