To create a new administrator profile, you must be logged in to an account with sufficient privileges, or as a super user administrator.
- Go to System Settings > Admin > Profile.
- Click Create New in the toolbar. The New Profile pane is displayed.
- Configure the following settings, and then click OK to create the new administrator profile.
Enter a name for this profile.
Optionally, enter a description for this profile. While not a requirement, a description can help to know what the profiles is for, or the levels it is set to.
Select the type of profile, either System Admin or Restricted Admin.
Select which permissions to enable from Web Filter Profile, Application Filter, and IPS Sensor.
This option is only available when Type is Restricted Admin. See Restricted administrators for information.
Select None, Read Only, or Read-Write access for the categories as required.
This option is only available when Type is System Admin.
Enable/disable privacy masking.
This option is only available when FortiAnalyzer features are enabled.
Masked Data Fields
Select the fields to mask: Destination Name, Source IP, Destination IP, User, Source Name, Email, Message, and/or Source MAC.
Data Mask Key
Enter the data masking encryption key. You need the Data Mask Key to see the original data.