Configuring the router-bgp on the branches
Use a script to configure the router-bgp in the branches.
To create the CLI script:
- Go to Device Manager > Scripts.
- In the toolbar, click Create New.
- Enter the script details such as the Script Name, Type, and Run script on.
- In the Script details field, paste the script:
- In the toolbar, click Run Script, and then select the devices you want to run the script on. Click Run Now.
Branch script example
config router bgp
set as 65501
set router-id 10.254.40.2
set keepalive-timer 1
set holdtime-timer 3
set ebgp-multipath enable
set scan-time 5
set distance-external 1
config neighbor
edit "10.254.40.1"
set advertisement-interval 1
set link-down-failover enable
set soft-reconfiguration enable
set remote-as 65500
set keep-alive-timer 1
set holdtime-timer 3
next
edit "10.254.41.1"
set advertisement-interval 1
set link-down-failover enable
set soft-reconfiguration enable
set remote-as 65500
set keep-alive-timer 1
set holdtime-timer 3
next
end
config network
edit 1
set prefix 10.100.4.0 255.255.255.0
next
end
end