Installing policy packages

Install the policy packages on the hub and branch FortiGates.

To install a policy package:

1. Go to Policy & Objects > Policy Packages.
2. In the toolbar, click Install > Install Wizard.
3. Follow the steps in the install wizard to install the policy package.

For information about installing policy packages, go to the FortiManager Document Library > FortiManager Administration Guide > Firewall Policy & Objects > Managing policy packages > Install a policy package.

After the policies are installed on the devices, FortiManager may make the following modifications to the FortiGate configurations: The tunnel-search property will no longer be set to nexthop on the spokes. The auto-discovery-sender and auto-discovery-receiver properties will no longer be enabled on the hub and spokes You can use the GUI or scripts to correct the configuration; however, you should first complete the following step, Configuring tunnel interfaces and dynamic mapping

To verify the policy packages were installed in the GUI:

1. Go to Device Manager > Device & Groups.
2. In the tree menu, click Managed Devices. In the Policy Package Status column, a check mark appears next to the package you installed.