ADOM device modes
An ADOM has two device modes: Normal (default) and Advanced.
In Normal mode, you cannot assign different FortiGate VDOMs to different ADOMs. The FortiGate unit can only be added to a single ADOM.
In Advanced mode, you can assign a VDOM from a single device to a different ADOM. This allows you to analyze data for individual VDOMs, but will result in more complicated management scenarios. It is recommended only for advanced users.
|
FortiManager does not support splitting FortiGate VDOMs between multiple ADOMs in different device modes. |
To change from Advanced mode back to Normal mode, you must ensure no FortiGate VDOMs are assigned to an ADOM.
To change the ADOM device mode:
- Go to System Settings > Advanced > Advanced Settings.
- In the ADOM Mode field, select either Normal or Advanced.
- Select Apply to apply your changes.
