Fortinet black logo

Administration Guide

Enable or disable FortiAnalyzer features

Enable or disable FortiAnalyzer features

If FortiAnalyzer features are enabled, you cannot add a FortiAnalyzer units to the FortiManager. If a FortiAnalyzer is added to the FortiManager, FortiAnalyzer features are automatically enabled to support the managed FortiAnalyzer unit, and cannot be disabled.

See Adding FortiAnalyzer devices for more information.

To enable or disable the FortiAnalyzer features from the GUI:
  1. Go to System Settings > Dashboard.
  2. In the System Information widget, click the FortiAnalyzer Features toggle switch.

    The FortiManager will reboot to apply the change.

To enable or disable the FortiAnalyzer features from the CLI:
  1. Log in to the FortiManager CLI.
  2. Enter the following commands:

    config system global

    set faz-status {enable | disable}

    end

The FortiAnalyzer feature set is not available on the FortiManager 100C.

Enable or disable FortiAnalyzer features

If FortiAnalyzer features are enabled, you cannot add a FortiAnalyzer units to the FortiManager. If a FortiAnalyzer is added to the FortiManager, FortiAnalyzer features are automatically enabled to support the managed FortiAnalyzer unit, and cannot be disabled.

See Adding FortiAnalyzer devices for more information.

To enable or disable the FortiAnalyzer features from the GUI:
  1. Go to System Settings > Dashboard.
  2. In the System Information widget, click the FortiAnalyzer Features toggle switch.

    The FortiManager will reboot to apply the change.

To enable or disable the FortiAnalyzer features from the CLI:
  1. Log in to the FortiManager CLI.
  2. Enter the following commands:

    config system global

    set faz-status {enable | disable}

    end

The FortiAnalyzer feature set is not available on the FortiManager 100C.