Fortinet black logo

Administration Guide

Enabling FortiAP per-device management

Enabling FortiAP per-device management

When per-device management is enabled, you can configure changes on each managed FortiAP.

To enable access point per-device management:
  1. Go to System Settings > All ADOMs.
  2. Double-click the ADOM to open it for editing.
  3. Beside Central Management, clear the FortiAP checkbox, and click OK.

    Central management is disabled, and per-device management is enabled for AP Manager.

  4. Go to AP Manager, and notice that Per-device Management is displayed in the top-right corner.

Enabling FortiAP per-device management

When per-device management is enabled, you can configure changes on each managed FortiAP.

To enable access point per-device management:
  1. Go to System Settings > All ADOMs.
  2. Double-click the ADOM to open it for editing.
  3. Beside Central Management, clear the FortiAP checkbox, and click OK.

    Central management is disabled, and per-device management is enabled for AP Manager.

  4. Go to AP Manager, and notice that Per-device Management is displayed in the top-right corner.