Health-check servers per-device mapping
Adding a Health-Check Server makes it the default server for all VDOMs on the FortiGate device. With per-device mapping, you can add a different Health-Check Server for each VDOM on the FortiGate device.
To add health-check per-device mapping:
- Ensure that you are in the correct ADOM and that central SD-WAN management is enabled.
- Go to Device Manager > SD-WAN > Health-Check Servers.
- Click Create New in the content pane toolbar. The Create New WAN Detect Server page opens.
- Enable Per-Device Mapping.
- Click Create New in the per-device mapping toolbar.
- Select a Mapped Device from the drop-down list.
- Enter the Detect Server IP address, and add additional detect servers as needed.
- Click OK.
To edit health-check per-device mapping:
- If using ADOMs, ensure that you are in the correct ADOM.
- Go to Device Manager > SD-WAN > Health-Check Servers.
- Click Create New in the content pane toolbar, or right-click and select Create New. The Create New WAN Detect Server page opens.
- Select a per device mapping then click Edit in the per-device mapping toolbar.
- Edit the settings as required, then click OK.
To delete health-check per-device mappings:
- If using ADOMs, ensure that you are in the correct ADOM.
- Go to Device Manager > SD-WAN > Health-Check Servers.
- Click Create New in the content pane toolbar, or right-click and select Create New. The Create New WAN Detect Server page opens.
- Select one or more per device mapping, then click Delete in the per-device mapping toolbar.
- Click OK in the confirmation dialog box to delete the mapping or mappings.