Fortinet black logo

SD-WAN Orchestrator 7.0.0.r1 Administration Guide

Creating BGP neighbors

7.0.0
Copy Link
Copy Doc ID 11338d8b-a934-11eb-b70b-00505692583a:602400
Download PDF

Creating BGP neighbors

After the device is added to SD-WAN Orchestrator MEA, you can override profile settings for each device. For example, you can add a BGP neighbor. The BGP neighbor applies only to the device.

To create BGP neighbors:
  1. Go to Configuration > Device.
  2. Expand the region.

    The devices in the region are displayed.

  3. Double-click the device to open it for editing.

    The Device / <name> dialog box is displayed.

  4. Click the Network tab, and expand the BGP section.
  5. Under Neighbors, click Create New.

    A + BGP Neighbor dialog box displays.

  6. Configure the options, and click OK.

    The BGP neighbor is added.

  7. Click OK to save the changes.
  8. Install the configuration changes. See Installing configuration changes.

Creating BGP neighbors

After the device is added to SD-WAN Orchestrator MEA, you can override profile settings for each device. For example, you can add a BGP neighbor. The BGP neighbor applies only to the device.

To create BGP neighbors:
  1. Go to Configuration > Device.
  2. Expand the region.

    The devices in the region are displayed.

  3. Double-click the device to open it for editing.

    The Device / <name> dialog box is displayed.

  4. Click the Network tab, and expand the BGP section.
  5. Under Neighbors, click Create New.

    A + BGP Neighbor dialog box displays.

  6. Configure the options, and click OK.

    The BGP neighbor is added.

  7. Click OK to save the changes.
  8. Install the configuration changes. See Installing configuration changes.