Adding a Notification Filter
To add a notification filter:
- Click the Add button on the upper-left of the Notification Filters table. The Add Notification Filters dialog appears.
- Enter a name for the notification filter in the Filter Name field.
- Select a notification profile from the Notification Profile drop-down to associate that notification profile with the notification filter being created.
- Set the filter status to Active or Inactive by toggling the Filter Status toggle. By default, it is set to Active.
- Enter a MAC/IP address in the Alarm Device field. It is optional.
- Enter an IP address/Hostname in the Alarm Source field. It is optional.
- Enter a description for the notification filter in the Filter Description field. It is optional.
- Enter a message in the Alarm Message field. It is optional.
- Select one or more options in the Alarm Severity field. To select multiple options, press the Ctrl key on the keyboard and click the options.
- Select one or more options in the Include Alarms field to specify the type of alarms to be included in the notification filter.
- Select one or more options in the Exclude Alarms field to specify the type of alarms to be excluded from the notification filter.
- Select an AP group from the AP Group field.
- Click Save. A notification filter is created and added to the table.