SNMP V3 User Management
The SNMP V3 User Management tab displays a table that lists the SNMP v3 users enabled to respond to SNMP v3 service requests. The table summarizes the following user parameters:
|
Parameter |
Description |
|---|---|
| Username | The username of the user. |
| Authentication Protocol | The protocol type used for authentication. |
| Privacy Protocol | The protocol type used for data encryption. |
You can add or delete an SNMP v3 user, or change the password of an SNMP v3 user:
- See Adding SNMP v3 users.
- See Deleting SNMP v3 users.
- See Changing the password for an SNMP v3 users.
Adding SNMP v3 users
To add an SNMP v3 user:
- Click the Add button on the upper-left of the table. The Add dialog appears.
- Enter a userame in the Username field.
- Select an option from the Authentication Protocol drop-down list.
- Enter a string of characters in the Authentication String field.
- Select an option from the Privacy Protocol drop-down list.
- Enter a string of characters in the Privacy String field.
- Click Save. A new SNMP v3 user is added and listed in the table.
Deleting SNMP v3 users
To delete an SNMP v3 user:
- Select the SNMP v3 user to be deleted by clicking on the corresponding check box in the table.
- Click the Delete button on the upper-left of the table.
- Click Yes in the confirmation dialog. The selected SNMP v3 user is deleted.
Changing the password for an SNMP v3 users
To change the password for an SNMP v3 user:
- Select the SNMP v3 user by clicking on the corresponding check box in the table.
- Click the Password Reset button on the upper-left of the table. The Password Reset dialog appears.
- Modify the Authentication String and Privacy String fields as required.
- Click Save. The password is reset successfully for the selected SNMP v3 user.