Fortinet black logo

Reviewing the SD-WAN configuration in FortiManager 6.4

7.0.3
Copy Link
Copy Doc ID 271433d5-e829-11ec-bb32-fa163e15d75b:250499
Download PDF

Reviewing the SD-WAN configuration in FortiManager 6.4

This section describes what SD-WAN settings to review in FortiManager 6.4 before upgrading to FortiManager 7.0.

The interface members use per-device mapping.

To review SD-WAN settings in FortiManager 6.4:
  1. Go to Device Manager > Device & Groups, and ensure all devices used for SD-WAN have been added to FortiManager and authorized, and the configuration is synchronized.

    In the following example, all devices are visible:

    • HUB
    • Branch 1
    • Branch 2

  2. In Device Manager, go to SD-WAN > Interface Members.

    In this example, the following interfaces are displayed, and they are configured with per-device mappings:

    • port2
    • port3
    • vpn_dc1-1
    • vpn_dc1-2

  3. Double-click each interface to display its details, and then click Cancel to close the pane.

    Notice that Per-Device Mapping is enabled for each interface.

    For example, double-click the interface named port2 to display its settings.

    Following are the settings for the interface named port3.

    Following are the settings for interface vpn_dc1-1.

    Following are the settings for interface vpn_dc1-2.

  4. Click Health-Check Servers to ensure health-check servers are configured for SD-WAN.

    The following example uses several health-check servers.

  5. Click SD-WAN Templates to review the SD-WAN template.

    The following example uses an SD-WAN template named sdwan-branch.

  6. Double-click the SD-WAN template to open it and review its settings.

Reviewing the SD-WAN configuration in FortiManager 6.4

This section describes what SD-WAN settings to review in FortiManager 6.4 before upgrading to FortiManager 7.0.

The interface members use per-device mapping.

To review SD-WAN settings in FortiManager 6.4:
  1. Go to Device Manager > Device & Groups, and ensure all devices used for SD-WAN have been added to FortiManager and authorized, and the configuration is synchronized.

    In the following example, all devices are visible:

    • HUB
    • Branch 1
    • Branch 2

  2. In Device Manager, go to SD-WAN > Interface Members.

    In this example, the following interfaces are displayed, and they are configured with per-device mappings:

    • port2
    • port3
    • vpn_dc1-1
    • vpn_dc1-2

  3. Double-click each interface to display its details, and then click Cancel to close the pane.

    Notice that Per-Device Mapping is enabled for each interface.

    For example, double-click the interface named port2 to display its settings.

    Following are the settings for the interface named port3.

    Following are the settings for interface vpn_dc1-1.

    Following are the settings for interface vpn_dc1-2.

  4. Click Health-Check Servers to ensure health-check servers are configured for SD-WAN.

    The following example uses several health-check servers.

  5. Click SD-WAN Templates to review the SD-WAN template.

    The following example uses an SD-WAN template named sdwan-branch.

  6. Double-click the SD-WAN template to open it and review its settings.